Allicdata Part #: | 1516-1018-ND |
Manufacturer Part#: |
Q3083 |
Price: | $ 0.60 |
Product Category: | Isolators |
Manufacturer: | QT Brightek (QTB) |
Short Description: | OPTOISOLATOR 5KV TRIAC 6DIP |
More Detail: | Optoisolator Triac Output 5000Vrms 1 Channel 6-DIP |
DataSheet: | Q3083 Datasheet/PDF |
Quantity: | 1000 |
60 +: | $ 0.53708 |
Current - LED Trigger (Ift) (Max): | 5mA |
Approvals: | UR, VDE |
Supplier Device Package: | 6-DIP |
Package / Case: | 6-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -55°C ~ 100°C |
Current - DC Forward (If) (Max): | 60mA |
Voltage - Forward (Vf) (Typ): | 1.5V (Max) |
Turn On Time: | -- |
Current - Hold (Ih): | 280µA (Typ) |
Series: | -- |
Static dV/dt (Min): | 600V/µs |
Voltage - Off State: | 800V |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Zero Crossing Circuit: | Yes |
Output Type: | Triac |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators - Triac, SCR Output typically take the form of a compact black plastic package comprising an LED, a phototriac, and a transparent optical isolator, such as the Q3083. The Q3083 can help provide electrical insulation between circuits by using a combination of LED and phototriac switches. In addition, it can provide logic level control of the switching voltage and current.
The key difference between regular optoisolators and the Q3083 is the presence of a triac device. A triac is an electronic component that controls the current flow between two points using the logic level of the input signal. It consists of two semiconductor junctions between three electrodes and can be used for AC (alternating current) switching. When current is applied the triac can switch at a specified conduction angle and turn the current on and off.
In the Q3083, the LED is used as the input for the optoisolator and when it receives the signal, it is converted and the output is controlled by the phototriac. The phototriac switch is a semiconductor device that uses light to trigger the current flow through it. When the LED emits light, the phototriac switch is closed and allows the current to flow through it. The phototriac switch then controls the output voltage of the optoisolator.
The Q3083 also has a built-in voltage protection circuit. This circuit is used to prevent the output voltage from exceeding a certain level that could damage the device. This voltage is adjustable and the output voltage can be set to either 6 or 8 volts depending on the application. The frequency of the device is set to 1.5 kHz and is suitable for the majority of applications.
The Q3083 optoisolator is typically used in applications where low voltage and currents are required, such as in power supplies, motor controls, and relay circuits. It is also used to isolate logic levels from the higher voltage levels in the circuit. In addition, it is used to provide feedback control and signal conditioning in PLC (programmable logic controller) applications. It can also be used in switching power supplies to prevent overvoltage or over current conditions.
In summary, the Q3083 optoisolator is an important device with a wide variety of applications. It provides a low voltage and current level control with integrated protection circuitry. It is used in a variety of applications including power supplies, motor controls, and relay circuits. It is also used for providing feedback control and signal conditioning in PLCs. The Q3083 is a highly reliable optoisolator that can provide protection from overvoltage and overcurrent conditions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
Q3082 | QT Brightek ... | 0.6 $ | 1000 | OPTOISOLATOR 5KV TRIAC 6D... |
Q3083 | QT Brightek ... | 0.6 $ | 1000 | OPTOISOLATOR 5KV TRIAC 6D... |
BC6-Q308-02 | TE Connectiv... | 2.23 $ | 1132 | CONN BARRIER STRIP 2CIRC ... |
JC6-Q308-07 | TE Connectiv... | 4.6 $ | 238 | CONN BARRIER STRIP 7CIRC ... |
JC6-Q308-05 | TE Connectiv... | 5.38 $ | 303 | CONN BARRIER STRIP 5CIRC ... |
BC6-Q308-13 | TE Connectiv... | 7.68 $ | 1000 | CONN BARRIER STRP 13CIRC ... |
BC6-Q308-03 | TE Connectiv... | 1.74 $ | 1000 | CONN BARRIER STRIP 3CIRC ... |
JC6-Q308-02 | TE Connectiv... | 2.17 $ | 1000 | CONN BARRIER STRIP 2CIRC ... |
BC6-Q308-06 | TE Connectiv... | 4.81 $ | 1000 | CONN BARRIER STRIP 6CIRC ... |
JC6-Q308-06 | TE Connectiv... | 6.55 $ | 1000 | CONN BARRIER STRIP 6CIRC ... |
JC6-Q308-03 | TE Connectiv... | 1.79 $ | 1000 | CONN BARRIER STRIP 3CIRC ... |
BC6-Q308-10 | TE Connectiv... | 6.77 $ | 1000 | CONN BARRIER STRP 10CIRC ... |
JC6-Q308-08 | TE Connectiv... | 6.61 $ | 1000 | CONN BARRIER STRIP 8CIRC ... |
OPTOISOLATOR 3.75KV TRIAC 4SMDOptoisolat...
OPTOISOLATOR 7.5KV TRIAC 6SMDOptoisolato...
OPTOISOLATOR 5.3KV TRIAC 6SMDOptoisolato...
OPTOISOLATOR 3.75KV TRIAC 4SOPOptoisolat...
OPTOISOLATOR 5KV TRIAC 6SMDOptoisolator ...
OPTOISOLATOR 5KV TRIAC 6DIPOptoisolator ...