Allicdata Part #: | QAM-RX10-433-ND |
Manufacturer Part#: |
QAM-RX10-433 |
Price: | $ 2.65 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | AM SUPER HETERODYNE RECEIVER 3-5 |
More Detail: | * RF Receiver Module |
DataSheet: | QAM-RX10-433 Datasheet/PDF |
Quantity: | 0 |
1 +: | $ 2.40660 |
10 +: | $ 2.15019 |
100 +: | $ 1.76293 |
Series: | * |
Packaging: | Bulk |
Part Status: | Active |
Package / Case: | Module |
Supplier Device Package: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF receivers provide the core of the data transfer chain within an RF system. The QAM-RX10-433 receiver is a demodulator designed to be used in the 433MHz ISM band and capable of decoding signal formats compliant with the CC1101 protocol. The QAM-RX10-433 is part of a new generation of radio systems using advanced techniques for interference rejection, signal gain, and improved signal-to-noise ratio. The system also incorporates techniques for enhancing the performance of the receiver in the presence of multipath.
Application Field of QAM-RX10-433
The 433MHz ISM band is widely used in low power, short range communication applications. The QAM-RX10-433 receiver is designed for such applications. This receiver is suitable for use in applications such as industrial sensors and monitoring systems, intelligent transportation systems, industrial motor controller systems, home automation, and control systems. It can also be used for general purpose communications and data collection purposes. Additionally, it can be used for systems requiring up to 250Kbps data rate. With its ability to operate on two different frequencies, the receiver is also a great fit for systems operating in a multi-channel environment.
Working Principle of QAM-RX10-433
The QAM-RX10-433 is designed to operate at input signals up to 400kHz. It uses advanced modulation techniques to provide improved interference rejection, signal gain, and improved signal-to-noise ratio. The receiver consists of three main sections: the RF section, the baseband section, and the receiver section. In the RF section, the incoming signal is amplified and tuned to the desired frequency. It also contains circuits that provide pre-amplification and filtering. In the baseband section, the signal is demodulated to recover the data. The receiver section then processes the data, providing error correction and other techniques to improve the signal. Finally, the data is sent to the user.
The QAM-RX10-433 is a highly efficient receiver capable of providing reliable data in noisy environments. Its use of advanced modulation techniques, such as forward error correction and signal gain increases, makes it the ideal receiver for applications in the 433MHz ISM band. Additionally, its capability of operating on two different frequencies, make it a great fit for systems operating in a multi-channel environment.
The specific data is subject to PDF, and the above content is for reference
Multi-band GNSS receiver with nanosecond...
High-performance LEA-6 series GPS module...
Simultaneous reception of GPS / QZSS, GL...
LEA-M8S module can receive up to 3 GNSS....
High-performance u-blox 6's LEA-6 se...
High-performance u-blox 5 LEA 5 series G...