Allicdata Part #: | QC-25P-ND |
Manufacturer Part#: |
QC-25P |
Price: | $ 22.09 |
Product Category: | Uncategorized |
Manufacturer: | 3M |
Short Description: | WHOLE HOUSE WATER TREATMENT MEDI |
More Detail: | N/A |
DataSheet: | QC-25P Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 20.07180 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
QC-25P is a fast scan 3D profilometer designed to quickly obtain accurate two-dimensional (2D) or three-dimensional (3D) measurements of small surfaces. It has wide range of applications in the field of semiconductors, electronics, compounds, and thin films. This article will discuss the application field and working principles of QC-25P.
QC-25P is used for planar measurements of a variety of materials such as wafers, solar cells, epitaxial silicon, mask alignment, optical glasses, etc. It is also used for non-planar measurements such as bumps, thin film sidewall measurements, and micro-electromechanical systems (MEMS). The instrument has a resolution up to 1 micron, and can be configured with different stages and objectives to enable measurements on a variety of materials. It is also equipped with a range of software to facilitate measurement and data analysis.
QC-25P\'s working principle is based on the scanning of a sample with a finely focused laser beam. The laser beam is moved in a consistent, precise path across the surface to be measured. As the laser beam traverses across the sample, the amount of deflection is measured using a detector. The detector records the amount of deflection and uses that information to form a topographical map of the sample surface. This topographical map gives engineers an accurate picture of the surface with respect to size, shape, and even minor surface irregularities.
In addition to its use in the semiconductor, electronics, and optics industries, QC-25P can also be used in the fields of Metallurgy, Aerospace, and Robotics. In Metallurgy, QC-25P can be used to measure the surface characteristics of castings and forging. In Aerospace, QC-25P is used for measuring the surface texture of jet engine parts and other components. QC-25P can also be used for measuring the surface flatness of robots for use in robotic applications.
In summary, QC-25P is a fast, accurate scanning 3D profilometer used for obtaining accurate 2D and 3D measurements of small surfaces. It is used widely in the semiconductor, electronics, compounds, and thin films industries. It works by scanning a sample with a finely focused laser beam and measuring the amount of deflection using a detector. QC-25P can also be used in the fields of Metallurgy, Aerospace, and Robotics for measuring surface characteristics of castings, forgings, jet engine parts, and robots.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE