Allicdata Part #: | 1516-1324-ND |
Manufacturer Part#: |
QT852 |
Price: | $ 0.97 |
Product Category: | Isolators |
Manufacturer: | QT Brightek (QTB) |
Short Description: | 4 PIN HIGH POWER PHOTODARLINGTON |
More Detail: | Optoisolator Darlington Output 5000Vrms 1 Channel ... |
DataSheet: | QT852 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.88200 |
10 +: | $ 0.71694 |
25 +: | $ 0.55138 |
100 +: | $ 0.49613 |
250 +: | $ 0.44100 |
500 +: | $ 0.37485 |
1000 +: | $ 0.30870 |
2500 +: | $ 0.29327 |
5000 +: | $ 0.28665 |
Output Type: | Darlington |
Supplier Device Package: | 4-DIP |
Package / Case: | 4-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | 1.2V |
Current - DC Forward (If) (Max): | 80mA |
Voltage - Forward (Vf) (Typ): | 1.2V |
Current - Output / Channel: | 150mA |
Voltage - Output (Max): | 350V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | 250µs, 95µs (Max) |
Turn On / Turn Off Time (Typ): | -- |
Current Transfer Ratio (Max): | 15000% @ 1mA |
Current Transfer Ratio (Min): | 1000% @ 1mA |
Voltage - Isolation: | 5000Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are electrically isolated electronic components that use light to convey signals between circuits. They are used to transmit signals from one circuit to another while maintaining high electrical isolation between the circuits. The various types of optoisolators are categorized based on their output configurations, which include transistor, photovoltaic, and triac outputs. The QT852 is a high-voltage optoisolator with a transistor output.
The QT852 optoisolator uses an LED as its input light source. The LED is positioned to direct light onto a four-pin integrated phototransistor. When the LED is illuminated, the phototransistor is activated and switches the output. The QT852 optoisolator has a wide range of supply voltage between 3V and 20V, which makes it suitable for both low-voltage and high-voltage applications. The device can operate over a wide temperature range between -40°C and 85°C.
The QT852 optoisolator is typically used to drive high-voltage loads, such as motors and contactors. It can also be used as an isolator to protect low-voltage circuits from high-voltage surges. The QT852 optoisolator has a maximum current rating of 1A, and a maximum voltage rating of 300V. It is capable of providing reliable signal isolation between circuits with different voltage levels and power ratings. The optoisolator also has a high dielectric strength of 4.5 kVrms.
The working principle of the QT852 optoisolator is based on the phototransistor switching mechanism. When the LED is illuminated, electrons inside the phototransistor are activated and the transistor switches on. This causes current to flow from the source to the load, which in turn activates the load. The optoisolator is also designed to provide electrical isolation between the source and load circuits, so that the two circuits are not affected by each other.
In conclusion, the QT852 optoisolator is a high-voltage, transistor-output optoisolator suitable for a variety of applications. It uses an LED as its input light source and a four-pin integrated phototransistor as its output. It is capable of providing reliable signal isolation between circuits with different voltage levels and power ratings. The device has a wide operating temperature range and a high dielectric strength. The working principle of the QT852 optoisolator is based on the phototransistor switching mechanism.
The specific data is subject to PDF, and the above content is for reference
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...