QTT0213ST1 Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators have become very important components in the design of a variety of electronic circuits and systems. Optoisolators, also known as opto-couplers, are used in many applications where electrical isolation is required between two circuits. In particular, the Optoisolators - Triac, SCR Output type, also referred to as QTT0213ST1, is a widely used optoisolator option.

An optoisolator acts as a bridge between two isolated systems, usually used for signal transmission between two different sections of a circuit. This optoisolator works by converting the digital electrical signal into an optical signal, which is directed to the other side of the optoisolator, where it is converted back into a digital electrical signal on the isolated side. The two isolation systems are kept completely separate, meaning that any current on one side has minimal effect on the other side.

The QTT0213ST1 is an optoisolator with special Triac output. The main purpose of this optoisolator is to provide electrical isolation between an input circuit and an AC output device. It is designed such that the Triac output can only be activated by a logic level at the input side. The device has a narrow gap between the Gate and Anode Leads. The Gate Lead carries a positive logic level voltage and the Cathode Lead carries AC. This gap ensures complete electrical isolation in the reverse direction.

The operating principle of the QTT0213ST1 is that when a logic level voltage is applied to the input side, the optoisolator triggers the Triac output, allowing an AC output current from the Anode Lead to the Cathode Lead. The logic level voltage must be sufficiently high enough to trigger the Triac, yet not so high enough to cause any damage to the optoisolator or the AC output device. The maximum current that the Triac can carry depends on the specific optoisolator model, and it is usually not more than 200mA.

This optoisolator is commonly used in a variety of applications. It can be used in motor control, AC/DC switching, lighting control, dimming control, and temperature control circuits. It is also used in power supplies, motor controllers, and other power switching circuits. It is also frequently used in motor control circuits that require precise timing and control. Due to its simple design, reliable operation, and electrical isolation, the QTT0213ST1 is a popular choice for such applications.

In conclusion, the QTT0213ST1 is an optoisolator with Triac output, designed for applications where electrical isolation is required between two circuits. It works by converting a digital electrical signal to an optical signal on one side, and then converting it back to a digital electrical signal on the isolated side. It is especially useful in motor control, AC/DC switching, lighting control, dimming control, and power supply circuits, due its precise timing and control capabilities.

The specific data is subject to PDF, and the above content is for reference