R10-E2P4-V700 Relays |
|
| Allicdata Part #: | PB1953-ND |
| Manufacturer Part#: |
R10-E2P4-V700 |
| Price: | $ 20.52 |
| Product Category: | Relays |
| Manufacturer: | TE Connectivity Potter & Brumfield Relays |
| Short Description: | RELAY GEN PURPOSE 4PDT 3A 24V |
| More Detail: | General Purpose Relay 4PDT (4 Form C) 24VDC Coil T... |
| DataSheet: |  R10-E2P4-V700 Datasheet/PDF |
| Quantity: | 547 |
| Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
| 1 +: | $ 18.66060 |
| 10 +: | $ 17.72760 |
| 25 +: | $ 16.79450 |
| 50 +: | $ 15.86150 |
| 100 +: | $ 14.92850 |
| 250 +: | $ 13.99550 |
| Coil Resistance: | 700 Ohms |
| Series: | R10 |
| Packaging: | Bulk |
| Lead Free Status / RoHS Status: | -- |
| Part Status: | Active |
| Relay Type: | General Purpose |
| Coil Type: | Non Latching |
| Coil Current: | 34.3mA |
| Coil Voltage: | 24VDC |
| Contact Form: | 4PDT (4 Form C) |
| Contact Rating (Current): | 3A |
| Switching Voltage: | 120VAC, 30VDC - Max |
| Turn On Voltage (Max): | 18 VDC |
| Turn Off Voltage (Min): | -- |
| Features: | -- |
| Mounting Type: | Through Hole |
| Termination Style: | PC Pin |
| Operating Temperature: | -55°C ~ 75°C |
| Contact Material: | Silver (Ag) |
| Coil Power: | 900 mW |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Relays, Over 2 Amps
A power relay is an electric device designed to switch on or off circuits in response to an input signal or command. Power relays are typically rated for greater than two amps and the R10-E2P4-V700 model is no exception.
R10-E2P4-V700 Application Field and Working Principle
The R10-E2P4-V700 is a specialized power relay designed for a particular set of applications. Its primary purpose is to control equipment on and off in response to electrical pulses or commands from a controller. This makes it well suited for applications ranging from motor speed control to temperature regulation. It is also widely used in the automation industry for controlling valves, switches, and other industrial equipment.
The R10-E2P4-V700 operates on either 110 or 220 Volts AC. It has a maximum switching current of 4 amperes and a maximum duty cycle of 10%. The device is equipped with a UL listed tested SPDT (Single Pole Double Throw) contact. This contact is used to switch on and off the electrical circuit and is rated for up to 4 amperes. Additionally, the R10-E2P4-V700 is designed to reduce electrical noise from the circuit which it is controlling.
The R10-E2P4-V700 operates on a simple principle of electromechanical control. The electric current from the source is received and converted into electro-mechanically movement, thus enabling the device to switch on and off the electrical circuits. This, in turn, helps to reduce the noise created when the circuits are switched on and off.
In order to ensure effective and efficient operation of the R10-E2P4-V700, certain safety precautions must be taken. These measures include the proper insulation of the wires and connections, as well as avoiding extended operation at a higher-than-rated voltage.
Overall, the R10-E2P4-V700 is an ideal solution in for applications needing reliable electrical control. Its low operating current and wide-range operation make it a desirable choice for controlling a variety of industrial equipment. The device is designed to reduce electrical noise so as to ensure smooth and efficient operation. As with any electronic component, proper installation and following safety guidelines are the key to effective and safe operation.
The specific data is subject to PDF, and the above content is for reference
General Purpose Relay Power PCB Relay SP...
RELAY GENERAL PURPOSERelay Coil
RELAY GEN PURP 4PDT 48VACRelay Coil
RELAY GEN PURP 4PDTRelay Coil
RELAYRelay Coil
CONN TERM BLOCKRelay Coil