R10-R2P2-V700

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps - R10-R2P2-V700 Application Field and Working Principle

The R10-R2P2-V700 is a type of power relay with a rated current greater than 2 amps, designed for use in numerous applications. It is used in applications such as motor control, communication equipment, and automated machine systems when energizing coil or load switch requirements. It is also used for AC and DC control circuits as well as for load current control to reduce energy consumption. This relay is designed to be used as part of an overload protection system.

The R10-R2P2-V700 is a dc or ac relay with a rated current of 2.2 A, an acceleration power of 2 W, a power dissipation of 2 W, and a coil voltage of 1 V DC. The control circuit current is 1 mA. It has a dielectric strength of 1500 Vrms and a contact bounce time of 1 ms. In the contact position, the contact opening force is 4 N, while the closed force was 8 N. The operating temperature range is -25 to 85 degrees Celsius. It is built into a rugged, sintered resin case and includes terminals for easy wiring.

The relay contains two primary components: an electromagnet and a plate made of iron. The electromagnet is a coil wrapped with copper wires. When a current passes through the coil, it produces a powerful magnetic flux. This flux interacts with the metal plate to create a force that actuates the relay. When the force is strong enough, the metal plate moves and completes an electrical circuit. This action is known as the "contact closure."

When no current is passing through the coil, the electromagnet will not pull the metal plate, and the electrical circuit remains open. The coil then acts as an open circuit in this position. This is the "no contact open" state. The "contact open" position occurs when the current is removed from the coil.

The rated current of the R10-R2P2-V700 is 2.2 A. This means that the device can reliably handle up to 2.2 A without any adverse effects. The control circuit current is 1 mA, which means that a relatively low current is enough to activate the relay. The operating temperature range of the device is -25 to 85 degrees Celsius, making it suitable for use in a wide range of environments.

The R10-R2P2-V700 can be used in both AC and DC control circuits and is designed to provide reliable overload protection. The device has a dielectric strength of 1500 Vrms and a contact bounce time of 1 ms. It is also built into a rugged, sintered resin case and includes terminals for easy wiring. The device is ideal for motor control, communication equipment, and automated machine systems.

In conclusion, the R10-R2P2-V700 is a type of power relay with a rated current of 2.2 A, an acceleration power of 2 W, and a power dissipation of 2 W. It is designed for use in a wide range of applications and is suitable for both AC and DC control circuits. Furthermore, it can be used as part of an overload protection system and is built into a rugged, sintered resin case for durability. The device is ideal for motor control, communication equipment, and automated machine systems.

The specific data is subject to PDF, and the above content is for reference