R1966ABLKBLKEFGRN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

R1966ABLKBLKEFGRN can be classified as a rocker switch. This type of switch is a mechanical switch which uses a rocking motion to open and close electrical circuits. It is commonly used in many industrial and commercial applications, from lighting fixtures to motor control systems.

The design of the R1966ABLKBLKEFGRN is quite simple, comprising a base, two contact plates and a actuator. The base contains the contacts, which are normally closed, with an actuator that opens and closes the switch depending on which direction the actuator is moved. When the switch is activated, the contact plates make contact, allowing electrical current to flow from one side to the other.

R1966ABLKBLKEFGRN is most commonly used in applications where a low cost on/off switch is desired. This includes a variety of applications such as lighting, HVAC control, and even audio and visual equipment. The switches are also popular in household applications such as doorbells and dimmers.

The basic principle behind rocker switches is relatively simple. The contacts are normally closed until the actuator is moved in one direction or another. When the actuator is pressed, the electrical circuit is closed, allowing electric current to flow through. It is important to note that rocker switches are very reliable and durable, which makes them ideal for many industrial and commercial applications. The switches are designed to be used in a variety of environments, and most will remain operational for many years.

The most important factor to consider when looking at the R1966ABLKBLKEFGRN is ease of use. The switch is designed to provide a low cost, reliable and easy to use solution. The actuator is designed to be easy to reach, and the contacts are designed to make consistent contact when pressed. The slightly raised face of the actuator helps to ensure that the switch is activated properly with minimal force.

To install the R1966ABLKBLKEFGRN, the base must be securely fastened to the body. This can be done using screws, rivets, or a fastener of choice. Once the base is mounted, the contacts can then be connected to either line or load. The actuator can then be connected to the electrical circuit, allowing the switch to be used.

Overall, the R1966ABLKBLKEFGRN is a reliable and easy to use rocker switch. It is ideal for applications where low cost, reliable and easy to use switches are desired. The simple design ensures that the switch can be used in a variety of environments without fail, and the contacts will remain reliable for many years.

The specific data is subject to PDF, and the above content is for reference