R5J51RE

Through Hole Resistors

Through hole resistors are resistors which are mounted through a hole in a circuit board. When mounted, the resistor is soldered to the circuit board so that all electrical connections between the resistor and the remaining circuit are complete. The most common type of through hole resistor is the wire-wound resistor. Wire-wound resistors are typically large component because they are designed for the most reliable process that offers the highest coefficient of power.These resistors are also known for having a low thermal coefficient and good power handling capabilities.

The R5J51RE application field and working principle are based on these capabilities. The conductive carbon is deposited in slots in the substrate material. By passing a high electrical current through the resistor, it generates heat. This heat is used to create an electrical bridge, called a junction, at the tip of each slot. This junction creates a conductive path for the current, which is regulated by the amount of voltage or current applied. The size of the slots determines the resistance value.

When the resistance is determined, a wire is then soldered into the slots. This wire is also insulated, and this provides the capacity to handle higher currents. The insulation also helps reduce the EMI interference that is generated when a resistor is used in higher voltage applications. It is important to remember that when the current is increased, the heat generated will increase as well.

The R5J51RE application field and working principle can be used in various applications and different types of circuits. They can be used in automotive, industrial, aerospace, and medical applications. For instance, when used in medical applications, the resistors can be used to help prevent interference from external sources. The wire-wound resistor also has the capability to withstand high temperatures and can be used in applications where high levels of heat are generated.

Through hole resistors are available in various packages in different sizes and levels of resistance. When selecting a resistor, it is important to make sure the size and type of resistor chosen will meet the requirements of the application. In addition, the resistance value should be chosen based on the current level and voltage. As with any electrical component, selecting the wrong resistor can lead to damage or improper functioning of the circuit.

Through hole resistors are used in almost any type of electronic circuit. They are well-suited for high power applications due to their high thermal coefficient and good power handling capabilities. The R5J51RE application field and working principle are based on these capabilities, which make them ideal for a variety of applications.