RA103J0J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature Sensors - NTC Thermistors are devices designed to measure temperature changes. The RA103J0J is one type of such device, which is able to detect changes in a wide range of temperatures, from -50 to 150°C. Because of its wide range of environmental responsiveness, it is commonly used across many different industries such as automotive, aerospace, energy, medical, and electronics.

An RA103J0J thermistor is specifically designed to employ the temperature coefficient of resistance. This means that the resistance of the thermistor changes as the temperature changes. This effect is known as the steinhart-hart equation, and it is used by the device to detect and calculate changes in environment temperature.

For the device to work, a resistor network must first be constructed. This network will use the thermistor in order to measure the change in temperature. The resistor network is usually constructed with a pair of resistors, a thermistor, and a voltage source. The thermistor is connected in between the resistor pair, so that a voltage can be applied across it. When this voltage is applied to a closed circuit, the current begins to move through the circuit. The resistor pair has a known value, so that the total current through the circuit is determined by the amount of resistance the thermistor has.

As the temperature changes, the thermistor\'s resistance also changes. This change causes the current through the circuit to also change. This in turn modifies the voltage readings that can be seen from the resistor network. By measuring these readings, the temperature can then be detected and calculated.

In many applications, the RA103J0J thermistor is used in combination with a digital to analog converter (DAC) or an analog to digital converter (ADC). The DAC or ADC can be used to transduce the voltage change into a digital representation, which can then be used for further processing or analysis. This type of combination is sometimes referred to as a \'sensoring system\'. The usage of a sensoring system allows for even more accurate and precise temperature measurements.

In addition to being a temperature sensor, the RA103J0J thermistor can also be used to measure humidity. This can be done by placing the thermistor in a humidity chamber. The wall of the chamber is designed to be permeable to water vapor. As the humidity in the chamber changes, the humidity in the air will cause the temperature inside the chamber to be different from the outside. This temperature difference can be measured by the thermistor, and it can be used to calculate the humidity level.

As you can see, the RA103J0J thermistor is a versatile device that can be used for a number of temperature and humidity sensing applications. It utilizes the principle of temperature coefficient of resistance in order to detect and measure changes in the environment. It can be used with either a DAC or ADC in order to further improve the accuracy of its readings.

The specific data is subject to PDF, and the above content is for reference