RAA230403GFT#AA0

Series:	--
Packaging:	Tray
Part Status:	Obsolete
Topology:	Step-Down (Buck) Synchronous (3), Linear (LDO) (1)
Function:	Any Function
Number of Outputs:	4
Frequency - Switching:	1.3MHz ~ 2.2MHz
Voltage/Current - Output 1:	3V, 500mA
Voltage/Current - Output 2:	3V, 100mA
Voltage/Current - Output 3:	3.3V, 1.5A
w/LED Driver:	No
w/Supervisor:	No
w/Sequencer:	No
Voltage - Supply:	2.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	32-TQFP Exposed Pad
Supplier Device Package:	32-TQFP (7x7)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Voltage Regulators - Linear + Switching

RAA230403GFT#AA0 voltage regulators are commonly used in different electrical and electronic systems. They provide highly efficient power converters between high and low voltage power/load systems thus providing the necessary power when needed. These voltage regulators are basically comprised of two main components – a transformer or a controller and a high-frequency switching inductor. The voltage regulator is designed to provide an input to the output voltage of the regulated system in the form of a higher frequency switching waveform. This waveform can be adjusted to match the requirements of the load.

The voltage regulator consists of a control module, which is responsible for controlling the output voltage of the system through regulation. The control module has several components that are responsible for controlling the voltage regulator’s output voltage. These components include an input section, a filtering section, an output section and a frequency changing section. The input section consists of a low noise amplifier (LNA) which is responsible for converting a low voltage signal from the input into a higher voltage. The filtering section is responsible for enhancing the signal-to-noise ratio of the signal by removing unwanted noise, while the output section is responsible for providing a regulated output voltage based on the input voltage. Finally, the frequency changing section allows the voltage regulator to switch frequencies in order to adjust the output voltage to match the load.

The primary application of the RAA230403GFT#AA0 voltage regulator is to provide power when needed. This can be done in a variety of ways, such as providing power to a PLC system, a stepper motor or a AC/DC power supply. The voltage regulator is also used in medical and aerospace applications where very precise levels of power are required. In addition, the regulator is also used to support high-speed data transmission over a network, such as in the Ethernet or Wi-Fi applications.

The working principle of the RAA230403GFT#AA0 voltage regulator is based on the principle of converting a low voltage signal into a high voltage by using a high frequency switching waveform. This waveform is adjusted so that it matches with the required voltage of the load. The input section of the regulator is first converted into a higher voltage signal and then filtered so that it can be used as the input power. The output section then adjusts the frequency of the switching waveform to match the output voltage based on the input power. Finally, the filtered signal is then adjusted for the maximum output voltage.

In summary, the RAA230403GFT#AA0 voltage regulator is an innovative design that provides efficient power converters that can be tailored to match the needs of a variety of applications. It has a highly versatile nature and can be used in a variety of locations ranging from medical and aerospace applications to networking and power systems. Furthermore, the working principle of the regulator is based on a high frequency switching waveform which is adjusted based on the input voltage. This ensures that the output voltage is always matched with the output voltage of the regulated system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description