RABS15M REG Discrete Semiconductor Products

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	1kV
Current - Average Rectified (Io):	1.5A
Voltage - Forward (Vf) (Max) @ If:	1V @ 1.5A
Current - Reverse Leakage @ Vr:	1µA @ 1000V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	4-SMD, Gull Wing
Supplier Device Package:	ABS-L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers - RABS15M REG Application Field and Working Principle

Bridge rectifiers are widely used in electronic circuits. They are essentially four diodes arranged in a specific way which allow current to flow through two directions. The bridge rectifier is used for converting Alternating Current (AC) to direct current (DC). Besides being used in all sorts of power supplies, it\'s very common for operating DC motors and for other power conversion needs. The RABS15M REG is a diode that has been combined with a bridge rectifier to form a single device, making it easier to integrate with other components in circuits. In this article, we will discuss the RABS15M REG application field and working principle.

RABS15M REG Application Field

The RABS15M REG is a bridge rectifier with integrated diodes, typically used in power supplies. It is most commonly found in control systems and other industrial applications like motors and drives. The RABS15M REG diode bridge rectifiers have an adjustable overvoltage protection, which helps to limit excessive voltage peaks and protect the circuit from damage due to these peaks. They are also available in ratings of up to 15A, which helps to ensure that they can meet most power supply requirements.The RABS15M REG diode bridge rectifiers can also be used for converting AC voltage to DC voltage. This is done by placing the RABS15M REG at the front end of the power supply circuit and using a transformer to reduce the AC voltage to a lower voltage level before passing it through the bridge rectifier. This ensures that the rectified output voltage is regulated and safe to use with other electronic components.

RABS15M REG Working Principle

The RABS15M REG is composed of four diodes connected in a specific arrangement that is known as a bridge rectifier. This arrangement ensures that current can only flow in one direction once the power is applied. When the AC mains voltage is connected to the bridge rectifier, the diode pairs connected to each phase alternate in conducting every half cycle. This alternation continues until the full cycle ends, allowing current to be converted from AC to DC. The output of the bridge rectifier is a pulsating DC wave with peaks that correspond to each half cycle of the AC mains voltage.The RABS15M REG diode bridge rectifier also has an adjustable overvoltage protection system that helps to ensure that the output voltage does not exceed a certain level. This helps to protect the connected components in the circuit from any possible damage caused by overvoltage.

Conclusion

The RABS15M REG diode bridge rectifier is a useful component in various power supplies and control systems. Its ability to convert AC to DC, its overvoltage protection system, and its capability of providing a steady output even during fluctuations makes it a desirable component in various industries. With its adjustable ratings, it can also be used in a variety of applications and circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description