RACM30-24SER/W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC and DC converters are commonplace in the modern technological world. They are used to convert alternating current (AC) electric power to direct current (DC) electric power. This is usually done with the help of a rectifier, a device which converts AC into DC. The AC DC Converters are used in a wide range of different electrical and electronic applications, from powering industrial and domestic applications, to providing power for complex medical equipment. The RACM30-24SER/W is one such model and below the application field and working principle of this unit is discussed in detail.

Application Field

The RACM30-24SER/W AC DC converter is designed for use in a variety of industrial applications. These include high power computing equipment, telecommunication systems, electrical drives, medical devices, consumer electronics, medical instruments and industrial electronic control systems. It is used in a range of different fields and is commonly seen in factories, hospitals, offices, homes and laboratories. This unit has a wide operating temperature range that allows for reliable operation in harsh environments. Furthermore, it boasts good thermal dissipation, making it suitable for use in extremely high temperatures.

Working Principle

The RACM30-24SER/W follows a basic current-control principle, which works on the concept of current-mode control. This involves sensing the current flowing through the machine and using that information to control the load. The current is sensed by a pair of transistors on the input side and output side. When the load is turned on, the transistors monitor the current and provide a control signal to the AC input. This signal tells the AC power source to increase or decrease the current as needed. This ensures that a constant load is maintained each time the machine is powered up.

The AC to DC conversion occurs by means of a full-wave rectifier circuit. This circuit serves to cancel out any unnecessary AC signals, allowing only the desired DC output to pass through. This DC output is regulated by the transistors, which act as a current-mode control and keep the current constant. In addition to this, the RACM30-24SER/W also boasts an onboard noise filter, which prevents high-frequency noise from affecting the electrical components of the machine.

Lastly, the unit utilizes state-of-the-art PFC (Power Factor Correction) technology to ensure that the electrical components of the machine are being supplied with a steady current. This technology is designed to help reduce power loss and increase efficiency, as the DC current is more efficiently used and any unnecessary AC signals are blocked out.

In conclusion, the RACM30-24SER/W is an AC DC converter that is designed for use in a variety of industrial applications. It follows a basic current-control principle, which enables it to supply a constant voltage to the electrical components of the machine. The AC to DC conversion is achieved through the use of a full-wave rectifier circuit, while the unit also boasts an onboard noise filter and PFC (Power Factor Correction) technology to maximize efficiency.

The specific data is subject to PDF, and the above content is for reference