RAVF104DFT56R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, electronics are broadly used in electrical engineering. RAVF104DFT56R0 is a resistor network designed by engineers to meet specific needs.

RAGF104DFT56R0 is a 4-terminal 1ohm resistor network which is a resistive device comprised of several sheets of resistors merged together and placed on the same substrate.It is mainly composed of 109 resistor paths that connect the four terminals. It is generally regarded as a single resistor with a resistance of 1 Ω, but this kind of resistor has a higher precision than regular resistors that show a single resistance value.

The structure of the RAGF104DFT56R0 is quite simple. It contains two resistor sheets, each consisting of nine resistors and connected in series. These nine resistors are connected up and down and the lower sheet is connected to the upper sheet. This type of resistor is usually smaller than a penny, with a size of 0.12×0.12×0.04 inch, and is much easier to integrate into electronic circuits than conventional single elements.

The main application of RAGF104DFT56R0 is its ability to reduce electrical noise in electronic circuits. The fact that it contains multiple resistors in series helps to reduce electrical noise, which makes it ideal for applications that measure signals that need to be kept very quiet. It is also used in power supplies, amplifiers, and switching circuits.

In terms of working principle, RAGF104DFT56R0 is a voltage-dependent resistor because the resistance changes on the basis of the applied voltage. Essentially, when a voltage is applied to the resistor, the resistance of the resistor increases and decreases based on the voltage amount. Therefore, when a steady voltage is applied, the resistance also stays steady. That is why it is used for noise reduction in electronic circuits.

In conclusion, RAGF104DFT56R0 is a specialized resistor network designed specifically for use in electronic devices. Its main application is to reduce electrical noise, which it can do through its voltage-dependent nature. By containing several resistors in series, this resistor network is more precise than single unit resistors. As such, it is widely used in devices that measure signals which need to be kept very quiet and in power supplies, amplifiers, and other switching circuits.

The specific data is subject to PDF, and the above content is for reference