RAVF104DFT82K0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays & RAVF104DFT82K0 Application Field and Working Principle

Resistors are electrical devices that allow for the control and management of electrical current in electrical circuits. Resistor networks, also known as assemblies, are combinations of resistors in one or more integrated circuits. These networks provide electrical connections between components in a circuit, allowing for current regulation and allowing for the coupling of signals from one part of a circuit to another. The ultimate goal in using a resistor network is to create a reliable, low-noise, low-impedance electrical connection.

Resistor blocks, or arrays, are combinations of resistors which are attached to an insulating substrate. These arrays usually are designed to provide an electrical connection between several components within a circuit. The design of the array, the size and type of resistors, and the material used for the substrate all depend upon the specific application.

The RAVF104DFT82K0 is an array, or resistor network, used in a variety of applications, for example in voltage dividers, level-shifting circuits, and output protection circuits. The RAVF104DFT82K0 consists of four resistors, each measuring 82K ohms, mounted on a four-pin insulating substrate. The device is designed to perform various tasks depending on the application.

The RAVF104DFT82K0 has two main application fields:

• Voltage Dividers: The device can be used to divide voltages between two points of a circuit. In a voltage divider, the output voltage is given by the ratio of the two resistors in the array. The RAVF104DFT82K0 can thus be used to control the output voltage in an application.
• Level-Shifting Circuits: The RAVF104DFT82K0 can be used in level-shifting circuits to boost a voltage to a higher level. The resistors in the network act as an impedance-matching device and help ensure correct voltage levels at the output of the circuit.

In addition to its application fields, the RAVF104DFT82K0 also has an associated working principle.

The working principle of the RAVF104DFT82K0 is based on Ohm\'s Law. As mentioned earlier, the device consists of four resistors, each of which measure 82K ohms. When a current is applied to the network, the voltage across each of the resistors will be equal to the current applied multiplied by the resistance value (V=IR). This same principle applies to voltage dividers, as the output voltage is determined by the ratio of the two resistors in the circuit. In a level-shifting circuit, the resistors act as an impedance-matching device, allowing for more efficient transfer of electrical signals.

The RAVF104DFT82K0 resistor network is a versatile component used in a variety of applications. Its application fields include voltage dividers and level-shifting circuits, and its working principle is based on Ohm\'s Law. With its combination of high-impedance resistors and an insulating substrate, it is an efficient and reliable component for any circuit.

The specific data is subject to PDF, and the above content is for reference