RC55Y-806RBI

Series:	RC
Packaging:	Tape & Box (TB)
Part Status:	Discontinued at Digi-Key
Resistance:	806 Ohms
Tolerance:	±0.1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±15ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.283" L (2.50mm x 7.20mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistor- RC55Y-806RBI

Through hole resistors are passive components that are widely used in electronic circuits due to their low cost and stability compared to other resistors. The RC55Y-806RBI is a 35 watt through hole resistor, suitable for higher power requirements. It can be used in a variety of applications, from high voltage and high current applications to printed circuit board traces.

Application

RC55Y-806RBI is mainly used in power supplies from 16 VAC to 250 VAC, and for suppressing transients on the output, although it can be used in other applications as well. It is typically used in power systems, machine tools, electric motors, radio frequency transmitters and more. It is also suitable for controlling current in an AC circuit, and can be used in place of an inductive load in switching power supply applications.

Construction

The RC55Y-806RBI resistor is made up of a ceramic body surrounding a carbon element. The ceramic body is made of a metal-oxide semiconductor ceramic material that has excellent electrical properties. The carbon element is made of a fine graphite powder which provides excellent heat conduction and electrical properties. The resistor is then enclosed in an insulating sleeve to provide protection and give it its unique shape.

Working Principle

The working principle of the RC55Y-806RBI is based on the concept of resistance. In an electrical circuit, resistance is the opposition to the flow of electric current, and is measured in ohms. When a voltage is applied to the resistor, an electric current flows through it. The amount of current that flows depends on the value of the resistor. The RC55Y-806RBI resistor is designed to behave a certain way when voltage is applied to it. When voltage is applied, the resistor will “resist” the flow of current, reducing the magnitude of the current. This resistance is dependent on the ohm value of the resistor. If a higher voltage is applied, the resistor will offer greater resistance, thus reducing the amount of current that flows through it.

Conclusion

The RC55Y-806RBI is a through hole resistor that is suitable for a variety of applications, from high voltage and high current applications to printed circuit board traces. It is mainly used in power supplies from 16 VAC to 250 VAC, and for suppressing transients on the output. It is also suitable for controlling current in an AC circuit, and can be used in place of an inductive load in switching power supply applications. The resistor is made up of a ceramic body surrounding a carbon element, and the working principle of the RC55Y-806RBI is based on the concept of resistance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description