RD7147-16-1M5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common mode chokes are a type of electromagnetic device used to reduce the amount of common mode current flowing through components of an electrical system. The RD7147-16-1M5 is an example of a common mode choke that was designed for installation in home and office wiring systems to reduce the amount of noise generated by high-speed signals travelling along the wires. The purpose of the RD7147-16-1M5 is to block the passage of unwanted common mode currents in data communication systems while allowing the desired signal to pass through unimpeded.

The RD7147-16-1M5 is a small, silver-plated encased choke with two terminals on each side of the encased. The terminals and the encased material are designed to allow maximum common mode current blocking capability. It is composed of a ferrite core inside a metal epoxy resin housing. The hollow core of the choke acts as a shield that absorbs the unwanted currents and traps them while allowing the desired signals to pass through.

The RD7147-16-1M5 is typically used in home and office wiring systems to reduce noise generated by high-speed signals. It can also be used in other applications where common mode noise reduction is necessary in order to achieve a desired signal quality. The choke is ideal for use in local area networks (LANs), telephone networks, audio systems, video equipment, digital and analog communications, and anywhere common mode current needs to be reduced.

The RD7147-16-1M5 has a wide range of applications, including automotive, communication, power supplies, home theaters, digital audio, and more. The choke limits the amount of common mode current flowing through sensitive electronic components in these devices, protecting them from interference and degradation caused by the unwanted signals. This keeps the signal distortion low and the signal quality high.

The working principle of the RD7147-16-1M5 is quite simple. The hollow core of the device acts as an inductor that generates an electromagnetic field. This field creates a resistance to the flow of the common mode currents and acts as a shield, trapping the unwanted signal and preventing it from entering the system. At the same time, the field also allows the desired signal to pass through unimpeded.

The RD7147-16-1M5 is an effective and reliable way to reduce common mode noise in electrical systems. It is a cost-effective solution that can help protect the signal quality and performance of sensitive electronics while providing an additional layer of protection. The RD7147-16-1M5 is well worth the investment for anyone looking for reliable common mode noise reduction.

The specific data is subject to PDF, and the above content is for reference