RDC30110D15

Current - Output (Max):	1A
Control Features:	Enable, Active High
Size / Dimension:	2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
Package / Case:	7-DIP Module, 6 Leads
Mounting Type:	Through Hole
Efficiency:	87%
Operating Temperature:	-40°C ~ 75°C
Features:	Remote On/Off, OCP, OVP, SCP, UVLO
Applications:	Railway
Voltage - Isolation:	1.5kV
Power (Watts):	30W
Series:	RDC
Voltage - Output 3:	--
Voltage - Output 2:	-15V
Voltage - Output 1:	15V
Voltage - Input (Max):	176V
Voltage - Input (Min):	55V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC ConvertersDC-DC converters are devices designed to alter the output of one DC power source to match the requirements of another. The RDC30110D15 is an example of a non-isolated DC-DC power converter providing a current-mode PWM control with some excellent features. It offers 15A of continuous current and tight line/load regulation. It is suitable for use in applications such as backlighting for industrial LCD displays, DC motor drive, computer peripheral power supplies, and consumer electronics. The working principle of the RDC30110D15 is based on the use of energy transfer elements which establish an efficient power conversion link between the input and output of DC-DC converters. These elements include power semiconductor switches such as MOSFETs and, in certain cases, inductors and capacitors. A pulse width modulation (PWM) controller regulates the conduction of the switches to convert the energy for the desired output voltage or current. The RDC30110D15 operates as a non-isolated DC-DC converter. This type of converter does not use an isolation transformer, which is required for isolated converters to prevent direct electrical contact between the input and output networks. It accepts an input voltage in the range of 4.5 to 36V DC and provides an adjustable output voltage between 1.5 and 12V DC. The PWM control passively switches current from the input to the output, making the conversion process more efficient than linear regulators which essentially dissipate excess energy into the form of heat. The converter is equipped with several features to ensure that it operates reliably. It is protected from input over voltage, output over voltage, output over current, and output short circuit conditions. There are built-in circuitry to prevent output current from reducing or stopping, and to assure that the off-time is large enough to allow sufficient charge transfer while switching. The device switches at a frequency of 300 kHz, minimizing the size of the passive components used in conjunction with it. The RDC30110D15 also features excellent line and load regulation of ±1% to produce a very stable output voltage. In summary, the RDC30110D15 DC-DC converter is well suited for applications which require high current output with tight line and load regulation. Its non-isolated configuration has the advantage of requiring fewer components and thus having a much smaller form factor than an isolated converter. Its internal protection features ensure reliable operation and its high switching frequency helps minimize component size. Therefore, it is the perfect choice for applications such as backlighting for industrial LCD displays, DC motor drive, computer peripheral power supplies, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description