RDC40110D12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC/DC converters are widely used in various fields due to their ability to efficiently transfer electrical energy from one voltage level to another voltage level, making them more versatile than AC/DC converters. This article will focus on RDC40110D12 application field and working principle.RDC40110D12 is a part of the DC/DC converter family which is designed specifically to convert an input voltage of 6-30V DC into a regulated output voltage of 12V DC at 1.2A with a high power density of up to 70W. It features a full-load efficiency of up to 93%, excellent high/low line regulation, low ripple and noise, and over-voltage protection. The device also has a wide range of operating temperatures from -40 degrees C to +125 degrees C.

The primary application of RDC40110D12 is in automotive, industrial, medical, instrumentation, and telecommunication applications where a regulated DC output is required. It is also widely used in remote powering of devices such as Ethernet power over cable (PoE), providing power to digital cameras, wireless access points, VoIP phones, among others. It can also be used in automated piece of machinery and robots for enabling automated tasks execution.

RDC40110D12 uses a conversion topology known as a buck converter which is a type of non-isolated regulator based on a switching regulator technique to successfully convert one DC voltage to another DC voltage. It operates based on a closed-loop control technique where a feedback voltage taken from the output is compared to an internal reference voltage. This signals the switching element (usually a transistor) to turn the input voltage on and off in a pulsed manner, thus, controlling the transfer of energy from the input to the output. The on and off pulses occur at a frequency determined by an external resistor connected to the FB pin of the regulator which sets the operating frequency.

The component of a buck converter consists of the input capacitor, output capacitor, inductor, switching element, and the controller IC. The input capacitor is used for smoothing and preventing surges in the input voltage while the output capacitor is used for filtering and storing energy to allow a continuous output voltage even when there are high transient loads. The inductor works together with the switching element to store energy and discharge it to the output when it is needed. These three components are connected in series with the switching element connecting between them. The IC then controls the switching element by commanding it to turn on and off in order to control the output voltage.

In conclusion, RDC40110D12 is a DC/DC converter with 6-30V input voltage and 12V output voltage with a high power density up to 70W. It is suitable for a wide range of applications such as automotive, industrial, medical, instrumentation, and telecommunication due to its excellent features and performance. It uses a buck converter topology based on the principle of a closed-loop control technique for efficient energy conversion. The components of the buck converter include the input capacitor, the output capacitor, the inductor, the switching element, and the controller IC, all of which work together to convert the input voltage to the desired output voltage.

The specific data is subject to PDF, and the above content is for reference