RDI-G-LP1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches are an important component of automation equipment, and the RDI-G-LP1 is one such device. The RDI-G-LP1 is a low-cost, ready-to-install, self-contained general purpose relay switch designed to control or monitor currents up to 500 mA at input voltages up to 30 volts DC. The device can be used in both indoor and outdoor application settings, or virtually anywhere a current needs to be monitored or adjusted in a safe and reliable manner.

The RDI-G-LP1 is a snap-action, bistable limit switch for controlling air flow, current and voltage. In its basic construction, the switch consists of two switching elements: a movable contact and a fixed contact. When the movable element is pushed or pulled, it engages the fixed element to either open or close the contact to activate the switch. The contact configuration is normally open, so the switch will remain in the off position until it is pressed or pulled to the on position.

The RDI-G-LP1 works by sensing the amount of current flowing through it and then using that to open or close its switch. When the current reaches a certain level, the circuit is closed, and when the current dips below that level, the circuit opens. This enables it to work as a safety switch, controlling air flow, light, or any other electrical current that needs to be monitored or controlled in a safe and reliable manner.

The switch uses a snap-action design, which means that once the current reaches the predetermined level, the switch will snap shut, ensuring that no current leaks out. This allows the switch to be used in a variety of applications, including motor starts, load shedding, and emergency shutoff systems. The snap-action of the switch also means that it can react quickly to current changes, making it ideal for applications where timeliness is of the utmost importance.

The RDI-G-LP1 is also able to withstand high levels of current and voltage, allowing it to be used in outdoor applications such as streetlights and outdoor lighting systems. The device is built with a double insulated construction, which means that its contacts are insulated from the outside environment, making it safer for longer life and reliability. The contacts are also UL Recognized and CE Certified for safety, so users can be assured that their safety is protected when using the switch.

The RDI-G-LP1 is an ideal solution for a variety of applications, including motor controls, load shedding, emergency shutoffs and outdoor lighting systems. Its snap-action, bistable limit switch makes it an ideal choice for controlling air flow, current and voltage. Its double insulated construction makes it safe to use in extreme conditions, while its UL Recognized and CE Certified approvals ensure its safety and reliability. The RDI-G-LP1 is an excellent choice for anyone needing a reliable, low-cost, ready-to-install switch for a range of applications.

The specific data is subject to PDF, and the above content is for reference