REC5-4805DRW/H4/A/M/CTRL

Current - Output (Max):	500mA, 500mA
Control Features:	Enable, Active Low
Size / Dimension:	1.26" L x 0.80" W x 0.40" H (32.0mm x 20.3mm x 10.2mm)
Package / Case:	24-DIP Module, 9 Leads
Mounting Type:	Through Hole
Efficiency:	81%
Operating Temperature:	-40°C ~ 75°C
Features:	Remote On/Off, SCP
Applications:	ITE (Commercial), Medical
Voltage - Isolation:	4kV
Power (Watts):	5W
Series:	ECONOLINE REC5
Voltage - Output 3:	--
Voltage - Output 2:	-5V
Voltage - Output 1:	5V
Voltage - Input (Max):	72V
Voltage - Input (Min):	36V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters: REC5-4805DRW/H4/A/M/CTRL Application Field and Working PrincipleDC/DC converters are designed to provide regulated power from a DC/DC power source. This particular REC5-4805DRW/H4/A/M/CTRL device is a step-up DC/DC converter device which steps up an input voltage to a regulated output voltage. The device is designed for applications where low supply voltages are available and output voltages up to 24V are needed. The REC5-4805DRW/H4/A/M/CTRL\'s application field is wide. It can be used for various projects, ranging from automotive electronics, home appliances, solar power systems to medical electronics and other industrial applications.The REC5-4805DRW/H4/A/M/CTRL has two operating modes. The first mode is the buck-boost mode, wherein an input voltage from a DC/DC converter is stepped up to a higher voltage. The second mode is a linear control mode, wherein an input voltage is regulated to an output voltage regardless of the input voltage\'s magnitude. The REC5-4805DRW/H4/A/M/CTRL\'s working principle is fairly simple and based on the principle of an inductor-capacitor (LC) filter. An LC filter is a device that acts as an inductor in the circuit. It consists of two energy-storing components, an inductor and a capacitor, that are connected in series or parallel to filter undesired frequencies and extract the required waveforms from a power supply. The LC filter works by allowing only the desired frequency of the input signal to pass through while blocking out other frequencies. The inductor stores energy when current flows, while the capacitor stores energy when voltage drops. The energy stored in the inductor and the capacitor is then filtered through the LC filter. The REC5-4805DRW/H4/A/M/CTRL DC/DC converter utilizes this principle to step up an input voltage to a regulated output voltage. The device is designed with a synchronous rectifier and a high-frequency inverter. The synchronous rectifier converts the incoming DC voltage into an AC voltage, and the high-frequency inverter then filters the AC voltage and supplies the output voltage. Through the combined action of the synchronous rectifier and the high-frequency inverter, the REC5-4805DRW/H4/A/M/CTRL DC/DC converter can step up the input voltage to a higher regulated output voltage. This ensures a consistent output voltage, regardless of the fluctuations in the input voltage. The REC5-4805DRW/H4/A/M/CTRL DC/DC converter is also designed for high efficiency, providing up to 95% efficiency of operation. This helps to reduce power loss while the device is operating, and thus reduce energy bills. It also ensures that the device does not generate any heat due to its high efficiency of operation. In conclusion, the REC5-4805DRW/H4/A/M/CTRL device is a step-up DC/DC converter which utilizes an LC filter to step up an input voltage to a regulated output voltage. The device is designed to be used for various applications, including automotive electronics, solar power systems, home appliances and medical electronics. The device is also designed for high efficiency of operation, ensuring that it does not generate any heat and helping to reduce power loss.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description