REC8-2412DRWZ/H2/A/M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic power supply systems that convert one DC voltage to a different and usually higher or lower DC voltage. REC8-2412DRWZ/H2/A/M is a DC-DC converter used for a variety of applications and can be configured to work in a variety of ways.

REC8-2412DRWZ/H2/A/M is a type of isolated DC-DC converter that provides conversion from wide input range (9V to 36V) to multiple fixed or adjustable outputs, in either a positive or negative polarity. It has 4kV DC isolation, features up to 4W output power, up to 95% efficiency, a wide input voltage range, and is protected with overvoltage protection (OVP) and overcurrent protection (OCP). Additionally, it has high accuracy, fast transient response, and full control loop compensation.

REC8-2412DRWZ/H2/A/M has a variety of applications, such as distributed power systems, industrial electronics, communication systems, and consumer electronics. It is particularly well-suited for applications where isolation and performance are key requirements.

The working principle of REC8-2412DRWZ/H2/A/M is based on the buck-boost converter. It is a type of switching converter that is used to convert a given input voltage to a higher or lower output voltage depending on the state of the switch, or “buck” or “boost”. The buck-boost converter is used in the REC8-2412DRWZ/H2/A/M to provide a wide input voltage range, allowing it to accommodate both higher and lower input voltages. The buck-boost converter consists of four main components: an inductor, a diode, a switch, and a capacitor. The capacitor stores energy while the inductor helps smooth the output voltage. The switch is precisely controlled by a signal from the controller and activated according to the desired output voltage. This switching action is what changes the input voltage to the desired output voltage.

A feedback loop is used in the REC8-2412DRWZ/H2/A/M to ensure that the output voltage remains regulated, despite changes in the input voltage. The feedback signal enters the controller, which then adjusts the switch signal accordingly to maintain the desired output voltage. The use of a controller also allows for the output voltage to be adjusted in various increments, allowing for fine tuning of the output voltage if necessary.

In addition to regulating the output voltage, REC8-2412DRWZ/H2/A/M also provides overvoltage and overcurrent protection. Overvoltage protection prevents the output voltage from exceeding a certain level. If the output voltage reaches a certain level, it will be limited by the controller, protecting the converter and other components connected to it. Similarly, overcurrent protection prevents the converter from drawing more current than it is designed for, protecting it from damage.

In summary, REC8-2412DRWZ/H2/A/M is a DC-DC converter with a wide input voltage range, up to 4W output power, up to 95% efficiency and high accuracy. It is ideally suited for distributed power systems, industrial electronics, communication systems, and consumer electronics. The switch-mode operation and feedback loop provide overvoltage and overcurrent protection, as well as a precise output voltage control.

The specific data is subject to PDF, and the above content is for reference