REG711EA-3.3/250G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Voltage regulators are electronic devices designed to maintain a constant voltage differential between two points in a digital or analog circuitry. Voltage regulators are commonly used in devices with battery-operated electrical systems, such as battery-operated portable equipment, or in cases where power fluctuations can occur due to external conditions. Voltage regulators come in a variety of packages and can be used to regulate power from AC or DC sources. Among the most commonly used voltage regulators is the REG711EA-3.3/250G4 DC DC switching regulator.

Application Field of REG711EA-3.3/250G4 Switching Regulator

The REG711EA-3.3/250G4 switching regulator is used in applications such as automotive engine control, airbag systems, audio and video systems, battery chargers, cell phone chargers and a variety of other equipment. It can provide current up to 250mA and is capable of supporting multiple power rail applications. The device can also be used to manage the power rails in a mobile device such as a mobile phone or tablet computer.

The REG711EA-3.3/250G4 switching regulator is designed to work with both 3.3V and 5V logic systems, and its wide operating range allows it to be used for various power architectures. The device also features on-chip short-circuit protection, over-current protection, and thermal protection. Additionally, the device provides a wide input voltage range, from 2.9V to 24V, which makes it suitable for many applications. Furthermore, the regulator features a wide output range (1.2V to 3.0V) which makes it suitable for high-power applications.

Working Principle of REG711EA-3.3/250G4 Switching Regulator

The REG711EA-3.3/250G4 switching regulator uses a fixed-frequency, voltage-mode PWM control architecture. The device consists of a high-side N-MOSFET switch and a low-side grounded N-MOSFET switch connected to a voltage reference and error amplifier. During the on-time interval, the high-side MOSFET is switched on and a current flows from the input voltage source to the load, resulting in voltage regulation and power delivery to the load. During the off-time interval, the low-side MOSFET is switched on, resulting in a short-circuit condition and the energy stored in the output capacitor is discharged back to the input voltage source.

The output voltage of the REG711EA-3.3/250G4 switching regulator is controlled by monitoring the output voltage with the error amplifier and comparing it with the reference voltage. If the output voltage is too low, the error amplifier signals the high-side MOSFET to remain on for a longer time, resulting in an increase of output voltage. Conversely, if the output voltage is too high, the error amplifier will signal the low-side MOSFET to remain on for a longer time, resulting in a decrease of output voltage. The gain of the error amplifier is programmable and can be adjusted to achieve the desired output voltage.

The REG711EA-3.3/250G4 switching regulator is an ideal choice for applications where cost and power efficiency are essential. The device’s wide operating range and ability to provide multiple power rails make it suitable for a variety of applications. Furthermore, the device’s fixed-frequency PWM architecture makes it easy to use and provides superior power regulation.

The specific data is subject to PDF, and the above content is for reference