REM6-2405S/A

Current - Output (Max):	1.2A
Size / Dimension:	1.25" L x 0.80" W x 0.40" H (31.8mm x 20.3mm x 10.2mm)
Package / Case:	24-DIP Module, 5 Leads
Mounting Type:	Through Hole
Efficiency:	86%
Operating Temperature:	-40°C ~ 105°C
Features:	Remote On/Off, OCP, OVP, SCP, UVLO
Applications:	ITE (Commercial), Medical
Voltage - Isolation:	5.0kV
Power (Watts):	6W
Series:	REM6
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices used to transfer DC power to a target output voltage. They are widely used in a wide range of applications, including powering embedded systems, automotive systems, industrial equipment, robots, lighting, and communications systems. The REM6-2405S/A is a DC-DC converter with optimal performance suitable for these applications.The REM6-2405S/A is a switch-mode converter with a moderate power rating and wide input voltage range. It is a synchronous rectifier step-down converter with an input voltage range of 8.0V to 36V and a constant voltage output up to 5V with a current of 1.2A. The operating frequency is fixed at 200kHz.The device is constructed from a combination of SMT components and discrete components, none of which need to be mounted. The most important part of the REM6-2405S/A is the switching MOSFET and the ESR capacitor which form the synchronous rectifier. The switching signal is generated by the control IC on the board. The output loop is regulated by a simple open-loop PWM controller.The basic working principle of the REM6-2405S/A is to use a high-frequency, full-bridge switching circuit to convert the input DC voltage into a high frequency AC voltage. The AC voltage is then rectified to DC and input into the output side. The output voltage is regulated by the control IC. An internal ESR capacitor is used to reduce EMI. The MOSFET switch is also used to limit the current to a safe level, thus ensuring safety.The REM6-2405S/A is ideal for low power applications, such as powering an embedded system, charging a battery, or powering an industrial system. Its low noise operation, wide input voltage range, and low power consumption make it suitable for a wide range of applications. In addition, its small size and light weight make it easy to install, making it an excellent choice for applications where a small form factor is required.The REM6-2405S/A can be used in a wide range of applications, including embedded systems, automotive systems, industrial equipment, robotics, lighting, and communication systems. In addition, it is suitable for a wide range of power levels, making it a versatile and cost-effective option for many applications.In conclusion, the REM6-2405S/A is a reliable and efficient DC-DC converter suitable for a wide range of applications, due to its wide input voltage range, low noise operation, and small form factor. It is also easy to install and use, making it a great choice for applications where space is limited.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description