Allicdata Part #: | 563-2073-ND |
Manufacturer Part#: |
RES20D-50-201-1 |
Price: | $ 19.40 |
Product Category: | Sensors, Transducers |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ROTARY ENCODER OPTICAL 50PPR |
More Detail: | N/A |
DataSheet: | RES20D-50-201-1 Datasheet/PDF |
Quantity: | 254 |
1 +: | $ 17.63370 |
10 +: | $ 16.37370 |
25 +: | $ 14.16950 |
50 +: | $ 11.96520 |
100 +: | $ 11.02060 |
250 +: | $ 10.70570 |
500 +: | $ 10.39090 |
Series: | RE |
Part Status: | Active |
Encoder Type: | Optical |
Output Type: | Quadrature (Incremental) |
Pulses per Revolution: | 50 |
Voltage - Supply: | 5V |
Actuator Type: | Shaft |
Detent: | No |
Built in Switch: | No |
Mounting Type: | Panel Mount |
Orientation: | User Selectable |
Termination Style: | Wire Leads |
Rotational Life (Cycles Min): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Encoders are electromechanical devices, typically in the form of a transducer, that convert one type of energy into another type of energy. In this case, it is the conversion of rotary mechanical motion into an electrical signal of linear or rotary motion. The RES20D-50-201-1 encoder specifically is ideal, offering robust and reliable performance in a wide range of industrial and commercial applications.
The RES20D-50-201-1 encoder is a rotary encoder, which is a device used to continuously monitor the speed and/or position of a rotating shaft by measuring its rotational angle. It includes a rotating shaft, an output signal generator, and a signal receiver. The RES20D-50-201-1 encoder is equipped with three electrical components: a signal generator (disk or code wheel), a receiver (or detector), and a connecting component (or resistor).
The signal generator is typically a disk or code wheel, which is equipped with a pattern of lines or codes. This pattern is usually radial, concentric, or a combination of the two. As the disk or code wheel rotates, the pattern moves past the detector, which reads the pattern and generates an electrical output. This output is then used to identify the position of the shaft.
The receiver or detector in the RES20D-50-201-1 encoder is a magnetic or optical device. In a magnetic encoder, a permanent magnet is mounted on the same shaft as the code wheel or disk, and the output is generated from changes in the magnetic field. In an optical encoder, infra-red light is used to read the code wheel patterns, and the output is generated from the variations in the transmitted light. Both magnetic and optical systems are highly reliable and precise.
The connecting component in the RES20D-50-201-1 encoder is a resistor, typically a single linear or rotary type. The resistor, which is placed between the active detector and the signal generator, allows the electrical output from the detector to be connected to the system\'s electrical signal processor. This enables the position of the shaft to be determined and displayed.
The RES20D-50-201-1 encoder can be used in many industrial and commercial applications, such as robots, printing presses, automated assembly machines, machine tools, medical equipment, and many more. Its precise operation, robust design, and reliable performance make it an ideal choice for any application. Additionally, it is cost-effective and easy to install and maintain.
To summarize, the RES20D-50-201-1 encoder is a rotary encoder that is ideal for a wide range of industrial and commercial applications. It is equipped with a signal generator, magnetic or optical receiver, and connecting component, and is highly reliable and precise. It is easy to install and maintain, and is cost-effective.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RES2K5E | Ohmite | 37.41 $ | 1000 | POT 2.5K OHM 12.5W WIREWO... |
RES250E | Ohmite | 34.22 $ | 1 | POT 250 OHM 12.5W WIREWOU... |
RES25RE | Ohmite | 34.22 $ | 8 | POT 25 OHM 12.5W WIREWOUN... |
RES2R0E | Ohmite | 36.13 $ | 18 | POT 2 OHM 12.5W WIREWOUND... |
RES200E | Ohmite | 37.28 $ | 1000 | POT 200 OHM 12.5W WIREWOU... |
RES25R | Ohmite | 37.93 $ | 1000 | POT 25 OHM 12.5W WIREWOUN... |
RES250 | Ohmite | 37.93 $ | 1000 | POT 250 OHM 12.5W WIREWOU... |
RES200 | Ohmite | 37.93 $ | 1000 | POT 200 OHM 12.5W WIREWOU... |
RES2R0 | Ohmite | 40.04 $ | 1000 | POT 2 OHM 12.5W WIREWOUND... |
RES2K5 | Ohmite | 41.48 $ | 1000 | POT 2.5K OHM 12.5W WIREWO... |
RES200K | Littelfuse I... | 8.29 $ | 1000 | NGR MONITOR TEST RESISTOR... |
RES20D-50-201-1 | Nidec Copal ... | 19.4 $ | 254 | ROTARY ENCODER OPTICAL 50... |
RES20-50-200 | Nidec Copal ... | 26.2 $ | 41 | ROTARY ENCODER OPTICAL 50... |
RES20-50-200-Z | Nidec Copal ... | 27.75 $ | 10 | ROTARY ENCODER OPTICAL 50... |
RES20-100-200 | Nidec Copal ... | 28.07 $ | 20 | ROTARY ENCODER OPTICAL 10... |
RES20-100-200-Z | Nidec Copal ... | 29.02 $ | 29 | ROTARY ENCODER OPTICAL 10... |
RES20B-25-201-1 | Nidec Copal ... | 30.88 $ | 28 | ROTARY ENCODER OPTICAL 25... |
RES20D-25-201-1 | Nidec Copal ... | 15.59 $ | 1000 | ROTARY ENCODERS |
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V