RF062PJ300CS

Power Per Element:	31.25mW
Height - Seated (Max):	0.013" (0.33mm)
Size / Dimension:	0.032" L x 0.024" W (0.80mm x 0.60mm)
Supplier Device Package:	0603
Package / Case:	0302 (0805 Metric), Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Series:	RF
Number of Pins:	4
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	2
Tolerance:	±5%
Resistance (Ohms):	30
Circuit Type:	Isolated
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The RF062PJ300CS is a type of resistor network, array, specifically a stacked array of two resistors. This device has two hundred contacts which are arranged in a four by fifty matrix. Resistors in this array are connected in parallel, providing high current carrying capacity and low voltage rating. The RF062PJ300CS can be used in many applications including voltage dividers, current limiting, and voltage buffering. These uses make it beneficial for circuit designers who wish to optimize load current, reduce output voltage ripple, and provide short circuit protection. The working principle of the RF062PJ300CS is based on the use of two resistors connected in series. The two resistors must be joined together in order for this device to function properly. The resistors are connected together by a common contact point, which is typically the fourth pin in the array. The two resistors combined together forms a potential divider circuit. When a voltage is applied to the circuit, it passes through both of the resistors and is subsequently divided by the resistor values. The voltage is output from both sides of the resistors which can be collected by separate outputs. This configuration allows for a number of different applications. Coil voltages can be adjusted to desired levels, and current limiting can be used to protect circuits from potential fault conditions. In addition, this device can be used for series connection of two resistors to provide a higher voltage rating. The RF062PJ300CS is a highly integrated device that allows for a great deal of flexibility. It is especially useful for voltage and current sensing, as well as short-circuit protection and fault detection. Its various uses make it a popular component for many circuit designs. In conclusion, the RF062PJ300CS is a two-resistor array that is used in many applications. It allows for voltage and current control, as well as fault protection. It provides a variety of uses for circuit designers and is a highly integrated component that makes circuit design easier.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description