RF064PJ274CS

Series:	RF
Part Status:	Active
Circuit Type:	Isolated
Resistance (Ohms):	270k
Tolerance:	±5%
Number of Resistors:	4
Resistor Matching Ratio:	--
Resistor-Ratio-Drift:	--
Number of Pins:	8
Power Per Element:	31.25mW
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 125°C
Applications:	--
Mounting Type:	Surface Mount
Package / Case:	0502 (1406 Metric), Long Side Terminals
Supplier Device Package:	0603
Size / Dimension:	0.055" L x 0.024" W (1.40mm x 0.60mm)
Height - Seated (Max):	0.013" (0.33mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays and the RF064PJ274CSThe RF064PJ274CS is a resistor network, array designed by Samsung semiconductor. It is a surface mount chip that has an ultra-low profile, low on resistance and high power rating. The device is a combination of a resistor and capacitor array all housed on a single substrate. It is designed to work in applications where space is an issue and requires a dense, very low resistance. The RF064PJ274CS is mainly used in automotive, industrial and consumer electronic applications because of the chip’s very low profile, very low resistance, and high power rating.The RF064PJ274CS is a surface mount device which consists of two rows of resistors and capacitors arranged in a rectangular pattern. The terminal points of each row are joined together in an alternating fashion. This creates a number of fixed resistor and capacitor cell sizes and shapes that determine the performance characteristics of the device. The combination of resistors and capacitors creates a low impedance network which is often used in noise reduction and impedance matching applications. The RF064PJ274CS is constructed with a combination of resistors and capacitors arranged in a rectangular layout on a single substrate. The resistors are made of high quality stainless steel, while the capacitors are formed of ceramic material. The resistors and capacitors are connected to each other in the same pattern as the rectangular layout and are configured in an alternating pattern. The alternating pattern is important as this determines the performance characteristics of the device and serves as an impedance matching network. The device is designed to allow a current to flow in both directions. The design also allows a reverse voltage protection system to be implemented, so it can be used in applications where a shock is an issue, or in applications with high voltage fluctuations. The reverse voltage protection system also ensures that the device does not cause any short circuits or current runaway problems. The device is also designed to reduce noise and provide a very low impedance as is needed in noise reduction and impedance matching applications. The RF064PJ274CS also has a high power rating, which makes it suitable for use in high power applications. The device can handle up to three amps of current and withstand a maximum voltage of seven volts. This makes it suitable for power supplies, motor control circuits, automotive applications, and consumer electronics. The working principle of the RF064PJ274CS is simple. The device is designed to create a low impedance network that reduces noise and provides impedance matching. It does this by connecting resistors and capacitors in a precise way, forming a combination of cells that create the desired effect. Each cell is configured in an alternating pattern, and the number and size of the cells are what determine the performance of the device. The device then works by creating a low impedance network that reduces noise and matches impedances. This enables it to be used in applications such as power supplies, motor controls, automotive, and consumer electronics. In conclusion, the RF064PJ274CS is a highly efficient surface mount resistor network, array that is designed for use in applications where space is an issue. It provides a very low profile, very low resistance, and high power rating which makes it perfect for automotive, industrial, and consumer electronics applications. The device works by connecting the resistors and capacitors in a precise way, creating a low impedance network that reduces noise and matches impedances.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description