Allicdata Part #: | RF1353C-ND |
Manufacturer Part#: |
RF1353C |
Price: | $ 0.60 |
Product Category: | Filters |
Manufacturer: | Murata Electronics North America |
Short Description: | FILTER SAW 345MHZ 8SMD |
More Detail: | N/A |
DataSheet: | RF1353C Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
2500 +: | $ 0.54810 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Frequency - Center: | 345MHz |
Bandwidth: | 430kHz |
Insertion Loss: | 4.5dB |
Ratings: | -- |
Applications: | Wireless |
Mounting Type: | Surface Mount |
Package / Case: | 8-SMD, No Lead |
Height (Max): | 0.067" (1.70mm) |
Size / Dimension: | 0.197" L x 0.197" W (5.00mm x 5.00mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Surface Acoustic Wave (SAW) filters are miniature acoustic filters that are used to help signal processing equipment reduce acoustic within its operating range. The filters are used to improve the signal-to-noise (SNR) ratio by reducing noise at specific frequencies which are usually lower than the frequencies that the signal needs to be heard. The RF1353C is a very popular SAW filter that is designed to help improve the range and signal-to-noise ratio of RF hardware and applications. This article will discuss the application field and working principle of the RF1353C.
RF1353C is an RF bandpass filter that has been specifically designed for use in GPS applications. It has a low passband ripple, a low insertion loss, and a high selectivity. It is designed to help boost the signal-to-noise ratio of any device that requires the use of GPS. This filter has a 3-pole elliptic design that reduces unwanted out-of-band noise while simultaneously providing a good frequency response. In addition, the filter also provides a good isolation between passbands, making sure that the signal from one frequency does not interfere with the signal from another frequency.
The main working principle of this filter is based on the resonance technique. It works by setting up an electrical field between two electrodes, and then passing sound waves through the field which is set up. The sound waves then interact with the electrical field and cause a resonance which then allows the signal to pass through. The sound wave then travels through the filter and finally exits as a filtered signal. This method of operation helps to reduce the noise and enhance the signal.
This filter is mainly used in automotive applications, for example, for GPS navigation and tracking. It helps to provide a better reception for vehicles and also helps to provide a better range for those receivers. It can also be used in consumer electronics, such as portable GPS units, as the filter helps to make sure that only the necessary signals are accepted. Other applications include radio and television broadcasting, as well as military communication. In all of these applications, the RF1353C ensures that the signals reach their intended receivers without being interfered with.
In conclusion, the RF1353C is an excellent choice for any application where a clean and clear signal is needed. Its low passband ripple and good isolation between the passbands ensure that unwanted signals do not interfere with the desired signal. Its excellent SNR makes the signal strong even in noisy environments and makes it perfect for use in a wide variety of applications. All in all, this filter is very reliable and cost-effective, making it a great choice for most applications.
The specific data is subject to PDF, and the above content is for reference
FILTER SAW 73.5996MHZ 10SMD
FILTER SAW
FILTER SAW
FILTER SAW
FILTER SAW
FILTER SAW