RF3181E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW filters are widely used in communication technology as basic components of circuits. As one type of SAW filter, RF3181E is a series of advanced SAW devices for enhanced performance and improved accuracy. It is especially suitable for applications such as receiver front-end filtering, transmitter IF and RF filtering, blocking, anti-aliasing and other complex RF systems. This paper will discuss the application field and working principle of RF3181E.

The RF3181E is a high-pass and low-pass SAW filter that provides excellent RF and microwave performance with sharp passband and high stopband. It is designed for applications requiring low insertion loss, symmetrical passband response and a wide dynamic range. Its nominal center frequency ranges from 500MHz to 2.5GHz, and its passband is 5 MHz or 6dB wide. It is ideal for applications such as wireless communication, multi-frequency wireless base station narrowband filtering, base station image-frequency filtering, Receiver Front-end Filtering, and Switched Mode Power Supply (SMPS) active filtering. It can also be used in power amplifiers, RF switching systems, and fiber-optic transmitters.

The RF3181E SAW filter is based on the surface acoustic wave (SAW) principle. SAW filters are passive components made from interdigitated electrodes on a surface of a piezoelectric substrate. When a voltage is applied, the piezoelectric material produces acoustic waves that propagate along the surface of the material. These waves interact with the interdigitated electrodes and cause reflected waves to form at the electrodes. By adjusting the spacing and geometry of the electrodes, the reflected waves can be adjusted to create a passband or stopband filter.

SAW filters provide superior performance compared to other types of filters, such as inductor/capacitor (LC) filters, at higher frequencies. This is due to the low insertion loss and high stopband attenuation of SAW filters that is made possible by the piezoelectric material. As SAW filters are relatively easy to manufacture, they are a cost-effective solution for high-frequency applications. In addition, SAW filters are immune to shock and vibration compared to other types of filters.

The RF3181E offers performance improvements over other SAW filters due to its high temperature stability and low insertion loss. The temperature stability of the RF3181E is achieved through the use of a proprietary temperature compensation scheme. This scheme helps to maintain the SAW filter\'s symmetry and uniformity of insertion loss across its wide temperature span. In addition, the RF3181E offers low insertion loss and high stopband attenuation, which is ideal for applications requiring strong signal filtering.

In conclusion, the RF3181E SAW filter is a series of advanced SAW filters designed for enhanced performance and improved accuracy. It is suitable for applications such as receiver front-end filtering, transmitter IF and RF filtering, blocking, anti-aliasing and other complex RF systems. Its advantages include high temperature stability, low insertion loss, high stopband attenuation, and immunity to shock and vibration. The RF3181E is an excellent choice for high-frequency applications where a cost-effective solution is required.

The specific data is subject to PDF, and the above content is for reference