Allicdata Part #: | RF600D-SO-ND |
Manufacturer Part#: |
RF600D-SO |
Price: | $ 2.81 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | |
Short Description: | IC DECODER 18DIP |
More Detail: | Decoder IC RF, IR 18-DIP |
DataSheet: | RF600D-SO Datasheet/PDF |
Quantity: | 72 |
1 +: | $ 2.55780 |
10 +: | $ 2.28249 |
100 +: | $ 1.87142 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Type: | Decoder |
Applications: | RF, IR |
Mounting Type: | Through Hole |
Package / Case: | 18-DIP (0.300", 7.62mm) |
Supplier Device Package: | 18-DIP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The RF600D-SO, or Single Output RF Power Detector, is an integrated circuit designed for high-performance wireless applications. It is a specialized IC that is used to accurately measure and detect the power of RF signals in environments where other power detectors are unable to provide adequate performance. The RF600D-SO is ideal for applications such as signal strength, signal quality, power amplifier calibration and testing, and monitoring and control in wireless communication systems.
The RF600D-SO is designed to provide a low power detection range of -60 dBm to 0 dBm. It features an on-chip comparator and an input signal conditioner (compressor) that helps to ensure accurate and linear performance in an environmental temperature range of -40°C to +85°C. Additionally, the conditioner filters out spurious signals and other out-of-band noise that may interfere with the signal.
The RF600D-SO is a high-frequency circuit that is capable of measuring signals at frequencies of 800 MHz and above. It is designed to be minimally impacted by changes in ambient temperature and also by the amplitude of the input signal. The RF600D-SO also has a low supply current and a low power input impedance, allowing for efficient integration into consumer and mobile applications.
The primary working principle of the RF600D-SO is based on a process of comparing the power of the incoming RF signal with a known reference voltage. When the voltage of the input signal is higher than the reference voltage, a power output is generated and when the voltage is lower, no power output is generated. The exact output power is then determined by the frequency of the input signal and the measured voltage. This process is then repeated for other input signals, until the exact power of the input signal is determined.
The RF600D-SO is capable of providing accurate and linear performance across a wide dynamic range, making it ideal for applications such as wireless communication systems where accurate measurements are required. Additionally, the low supply current and low power input impedance make it an efficient solution for integration into consumer and mobile applications. The RF600D-SO is a specialized IC designed for high-performance wireless applications, offering reliable, accurate, and linear detection of RF signals.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RF601T2D | ROHM Semicon... | 0.67 $ | 57 | DIODE ARRAY GP 200V 3A TO... |
RF601BM2DFHTL | ROHM Semicon... | -- | 2500 | SUPER FAST RECOVERY DIODE... |
RF601BM2DTL | ROHM Semicon... | 0.36 $ | 2500 | DIODE ARRAY GP 200V 6A TO... |
RF600E-SO | 1.89 $ | 80 | IC ENCODER 8SOEncoder IC ... | |
RF600D-SO | 2.81 $ | 72 | IC DECODER 18DIPDecoder I... | |
RF600D-SO8R6 | 2.5 $ | 1 | IC DECODER 18SOICDecoder ... | |
RF600E | 4.22 $ | 1000 | IC ENCODER 8DIPEncoder IC... | |
RF600D | 5.52 $ | 1000 | IC DECODER 18DIPDecoder I... | |
RF600789 | Avery Dennis... | 0.08 $ | 1000 | RFID INLAY DRY UHFRFID Ta... |
RF601B2DTL | ROHM Semicon... | 0.0 $ | 1000 | DIODE ARRAY GP 200V 3A CP... |
MC1350 integrated circuit monolithic int...
IC TDM 256CSBGATDM (Time Division Multip...
IC MULTI-QUEUE FLOW-CTRL 256BGAMulti-Que...
IC DAISY CHAIN SAMPLEIC
IC DAISY CHAIN SAMPLEIC
IC DAISY CHAIN SAMPLEIC