RFE250012 Power Supplies - External/Internal (Off-Board)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC-DC converters, such as the RFE250012, are devices used to convert alternating current (AC) to direct current (DC). This type of conversion is necessary for many applications, such as industrial processes, home electronics, and automotive systems. The underlying principle of operation for an AC-DC converter is the use of transformers, diodes, and capacitors.

Transformers are used to step down the voltage level of the AC. This is done by using a primary and secondary coil to reduce the voltage. The primary coil is connected to the AC source, while the secondary coil is connected to the DC load. The AC will induce a current in the secondary coil proportional to the turns ratio of the two coils.

After the voltage has been stepped down by the transformer, the AC signal is rectified by a set of diodes. The diodes are arranged in a bridge configuration so that they only allow current to flow in the desired direction. As the alternations of the AC signal occur, the diodes will alternate the direction of the current, resulting in a waveform that is both positive and negative. This waveform is known as a pulsed DC.

The output of the rectifier must be smoothed in order to be usable as direct current. This is done by a large capacitor, which stores the pulsed DC power and filters out the pulsing of the AC. This filtered power is then fed into the DC load. The size of the capacitor will determine how smoothly the DC output is delivered to the load.

For the RFE250012, the transformer is a switching type, with field-effect transistors (FETs) at the primary side and a diode bridge at the secondary side. This design allows for the AC-DC conversion to be done with very high efficiency, resulting in a very small size and light weight design. The switching frequency of the device can be adjusted to optimize its performance, and there are several protection mechanisms that ensure that the device doesn’t overheat or become damaged during operation.

The RFE250012 AC-DC converter is a highly efficient device that is well-suited to many applications. The combination of a switching transformer and a rectifier bridge ensures that the input AC is efficiently converted to a usable DC output, while the adjustable switching frequency provides flexibility for the user. The protection mechanisms ensure that the device is safe to operate in a variety of environments, while its small size and light weight make it an ideal choice for applications where size and weight are important factors.

The specific data is subject to PDF, and the above content is for reference