RFI75TL-12-D3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors are devices used to join two communication interfaces. In the radio frequency range, they are also commonly known as RF connectors. There are two primary categories of such connectors: male and female, with each type having unique characteristics and installation requirements.

The RFI75TL-12-D3 model is a male RF connector used in a variety of applications, such as broadcasting, military, cellular and high-speed Internet. This small connector measures 75 ohms, with an impedance rating of 50 ohms. It provides frequency ranging from DC up to 12GHz and a transmission loss of less than 2dB. This connector is specially designed to allow for small size, factoring in its connection components.

The application of the RFI75TL-12-D3 connector lies in its ability to transfer high-frequency signals with great efficiency and reliability. It operation principle is based on the impedance matching between the two distinct elements: the inner conductor and the outer conductor. The two are separated by an insulator layer, and the impedance between them is dictated by the geometry of the connector.

Furthermore, an air gap between the inner and outer conductor helps minimize the losses due to capacitance. The inner conductor has an inner dielectric core surrounded by a foil wrap and an outer conductive shield, while the outer conductor has an outer dielectric layer and an inner conductive shield. This design ensures the cables are connected firmly with minimal noise or interferences.

To establish the connection, the connector is screwed into a connection point. The materials of the contact points depend on each design, but they are usually sourced from brass, aluminum or polymer. The types of seals found on the connectors often range from PVC, nylon and PTFE. It is also essential to inspect the contact points for any scratches or marks in order to ensure the quality of the connection.

In conclusion, the use of RFI75TL-12-D3 connectors is meant for applications that require reliable and efficient transfer of high-frequency signals. It is important to ensure the installation of the connector is properly done in order to reach optimal performance. Further, the materials used for contact points must be chosen carefully to marry the environment of the application.

The specific data is subject to PDF, and the above content is for reference