Allicdata Part #: | 1292-1037-2-ND |
Manufacturer Part#: |
RFLPF2012090K0T |
Price: | $ 0.13 |
Product Category: | Filters |
Manufacturer: | Walsin Technology Corporation |
Short Description: | FILTER RF LOWPASS 5GHZ ISM SMD |
More Detail: | N/A |
DataSheet: | RFLPF2012090K0T Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
2000 +: | $ 0.12010 |
Series: | RFLPF |
Packaging: | Tape & Reel (TR) |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Frequency: | 5.4GHz Center |
Bandwidth: | 1GHz |
Filter Type: | Low Pass |
Ripple: | -- |
Insertion Loss: | 0.65dB |
Mounting Type: | Surface Mount |
Package / Case: | 0805 (2012 Metric), 8 PC Pad |
Size / Dimension: | 0.079" L x 0.049" W (2.00mm x 1.25mm) |
Height (Max): | 0.039" (1.00mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF filters are a type of radio-frequency (RF) device that is designed to attenuate or reject all frequencies outside a narrow frequency range, allowing only the desired frequencies to pass. The RF filters are typically constructed from a variety of materials including coaxial cable, coupling components, and metal-oxide varistors (MOVs).
The RFLPF2012090K0T is an example of an RF filter, specifically a low pass filter (LPF). It is used for applications such as cellular telephony, Wi-Fi, radio, and television broadcast equipment. It is a two-section filter with high insertion loss in the passband and very low insertion loss in the stopband. It has a frequency range of 0.1MHz to 20GHz, and an operating temperature range of -45°C to 85°C.
The working principle of this filter is as follows. A sheet of material called an interference filter is used to block off unwanted signals, while still allowing the desired signals to pass. This filter works by reflecting and absorbing energy at different frequencies. The energy reflected by this filter is attenuated, while the energy which passes through is unaffected. The attenuation is dependant on the bandwidth of the filter, and the frequency of the signal. Lower frequencies of signals will see higher levels of attenuation, while higher frequencies will be more unaffected.
Low pass filters like the RFLPF2012090K0T can be used to reduce interference and reduce the amount of power consumed by a device. It can also be used to protect vulnerable components from damage caused by high frequency signals. Electrical systems in aircraft and automobiles often use LPFs to reduce noise and improve signal-to-noise ratios.
The RFLPF2012090K0T is a high performance low pass filter that can be used in many different applications. It offers high insertion loss in the passband and very low insertion loss in the stopband, allowing for clear, interference-free transmissions. With its wide frequency range and operating temperature range, it can be used in many different environments.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RFLPF2012090K0T | Walsin Techn... | 0.13 $ | 1000 | FILTER RF LOWPASS 5GHZ IS... |
RFLPF1608060A07B1U | Walsin Techn... | 0.06 $ | 1000 | FILTER RF LOWPASS 2.4GHZ ... |
FILTER RF BALANCE 2.4GHZ ISM
RF FILTER
FILTER BANDPASS WLAN&BLUETOOTH
FILTER BANDPASS 2.4GHZ ISM SMD
FILTER BANDPASS FOR 5GHZ W-LAN S
FILTER BANDPASS FOR 3.5GHZ WIMAX