RG 2

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	400V
Current - Average Rectified (Io):	1.2A
Voltage - Forward (Vf) (Max) @ If:	1.8V @ 1.5A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	100ns
Current - Reverse Leakage @ Vr:	500µA @ 400V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	Axial
Supplier Device Package:	--
Operating Temperature - Junction:	-40°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

Rectifier diodes, commonly referred to as rectifiers, are electronic components that convert alternating current (AC) to direct current (DC). They are arguably the most essential component in any electronic or electrical circuit and are used in everything from power supplies to car ignition systems. The rectifier diode most commonly found in electronics is known as the RG2 diode. This article explores the working principle and application fields of RG2 diodes, and how they differ from other types of diodes.

Working Principle:

The RG2 diode consists of two electrodes attached to a semiconductor material that allows it to control the flow of current. When a positive voltage is applied to one end and a negative voltage to the other, current can flow in one direction but not the other. This is why rectifier diodes are known as “one-way valves” for electricity. The RG2 diode works in much the same way, but with a few important distinctions. The RG2 diode is a special kind of rectifier diode that is designed for specific applications.When the positive and negative voltages are equal, the diode is said to be in “blocking mode” and no current will flow. When the positive voltage rises above the negative voltage, the diode is said to be in “forward bias” and current will flow. The RG2 diode is designed to conduct current in the forward bias state while providing a high level of resistance in the reverse bias state. This is accomplished with a special “built-in resistance” that is engineered into the diode itself. This is why the RG2 diode is often referred to as a “high resistance rectifier”.

Application Fields:

The RG2 diode has a variety of application fields, ranging from power supplies to car ignition systems. In power supplies, the RG2 diode is often used to ensure that only DC power is supplied to the load. This is accomplished by rectifying the incoming AC signal into a unidirectional DC signal. In car ignitions systems, the RG2 diode is used to control the flow of current to the ignition coil. This allows the ignition coil to sustain a strong electrical impulse while preventing power from flowing in the opposite direction. The RG2 diode is also used in noise-filtering applications. It can be used to filter out unwanted noise from DC power signals and other types of circuitry. This is achieved by limiting the range of frequencies that can pass through the diode.

Conclusion:

The RG2 diode is a special kind of rectifier diode that is designed for specific applications. It consists of two electrodes attached to a semiconductor material and has a “built-in resistance” that allows it to conduct current in the forward bias state while providing a high level of resistance in the reverse bias state. The RG2 diode has a variety of application fields, ranging from power supplies to car ignition systems and noise-filtering applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description