RG1005P-103-D-T10 Resistors

Series:	RG
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	10 kOhms
Tolerance:	±0.5%
Power (Watts):	0.063W, 1/16W
Composition:	Thin Film
Features:	Anti-Sulfur, Automotive AEC-Q200
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	0402 (1005 Metric)
Supplier Device Package:	0402
Size / Dimension:	0.039" L x 0.020" W (1.00mm x 0.50mm)
Height - Seated (Max):	0.016" (0.40mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RG1005P-103-D-T10 is a type of chip resistor that is used in a wide range of applications. The number "1005" refers to the size of the package. The type of resistor is referred to as a surface-mount type, meaning that it can be mounted to the surface of a PCB without the need for soldering.The purpose of a chip resistor is to limit the current flowing between two points of a circuit. This is done by providing a resistive path that has a specific resistance (R) between them. The lower the resistance, the higher the current flow, and vice versa. Depending on the goals of the circuit, the resistance of the resistor can be adjusted accordingly.

Design and Working Principle

RG1005P-103-D-T10 is a surface-mount, four-terminal resistor made of a 2-layered ceramic substrate with a nickel finish. The main structure is made up of two ceramic discs separated by two metal electrodes, one on top and one on bottom. The electrodes are in contact with the ceramic substrate, allowing current to pass through the resistor.The resistor operates on the principle of Ohm\'s Law. According to Ohm\'s Law, voltage (V) is equal to the product of current (I) and resistance (R). Therefore, the resistance of the resistor controls the voltage, current and power passing through it. As the resistance is adjusted, the voltage and current can be regulated accordingly.The resistor is rated in ohms and is able to provide current from 1mA up to 1A with a voltage of 100V. The resistor is also designed to operate at a maximum temperature of 105°C, which is ideal for many commercial and industrial applications.

Applications

RG1005P-103-D-T10 is typically used in a wide variety of applications, including automobile, medical, audio, and industrial instrumentation. The resistor is typically used in applications where high-accuracy, low-power consumption, and low voltage are required.The resistor can be used for power limiting and current sensing in automotive applications. It can also be used for protection circuits, switches, and converters in medical applications. The resistor is also used in audio applications such as amplifiers and speakers, as well as for instrumentation, control systems, and industrial equipment.

Conclusion

RG1005P-103-D-T10 is a surface-mount chip resistor that is suitable for a wide range of applications. It operates on the principle of Ohm\'s Law, where the voltage is equal to the product of current and resistance. The resistor is ideal for automotive, medical, audio, and industrial instrumentation applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description