RGP0207CHJ82M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are widely used in electronic products, including the RGP0207CHJ82M. It is a resistor with two lead wires, each of them extending through the body of the resistor to the other side, while the terminals are located opposite of each other. The two wire leads are connected to the terminals from one side of the resistor to the other, by a solder joint. The body of the resistor is typically made from heat-resistant material such as ceramic, in order to remain stable and efficient under high temperature working condition.

The RGP0207CHJ82M is composed of a carbon composition body and copper-clad nickel terminals. It is designed for the purposes of voltage divider, current-limiting, and noise reduction in digital and analog circuits. It is a type of through-hole resistor, meaning it is designed to be soldered directly into circuit boards. The resistance value is marked on the top of the resistor, ranging from 1K ohm to 10M ohms in 1/4 watt increments.

The working principle of the RGP0207CHJ82M is based on the fact that a certain amount of electric current is required for a given voltage to be conducted through a material. The resistance value of the resistor determines how much current is allowed to flow, and the higher the resistance, the lower the current that can pass through the material. As electric current passes through the resistor, a voltage drop occurs across each resistor, depending on the amount of current that is present. The total resistance of the resistor is determined by the number of resistors in the series and the individual resistance values of each resistor.

The RGP0207CHJ82M is used in a wide array of applications. It is commonly incorporated into DC power supplies, motor controls, and as an electronic signal conditioner. It is also used to control the speed, direction, and power of motors. Additionally, it can be involved in noise frequency isolation to reduce interference in automotive systems, communications, and audio video equipment.

In conclusion, the RGP0207CHJ82M is a type of through-hole resistor that is composed of a carbon composition body and copper-clad nickel terminals. It is designed for the purposes of voltage divider, current-limiting, and noise reduction in digital and analog circuits. Its working principle is based on resistance to electric current flow and it is typically used in DC power supplies, motor controls, and as an electronic signal conditioner.

The specific data is subject to PDF, and the above content is for reference