RHL25R

Temperature Coefficient:	--
Mounting Type:	Panel Mount
Bushing Thread:	3/8-32
Actuator Diameter:	0.250" (6.35mm)
Actuator Length:	0.750" (19.05mm)
Actuator Type:	Slotted
Termination Style:	Solder Lug
Resistive Material:	Wirewound
Adjustment Type:	User Defined
Rotation:	300°
Number of Turns:	1
Series:	H
Power (Watts):	25W
Built in Switch:	None
Number of Gangs:	1
Tolerance:	±10%
Resistance (Ohms):	25
Taper:	Linear
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers, Rheostats

The RHL25R is a rotary potentiometer and a rheostat that is commonly used in a variety of applications. It is a type of variable resistor, and it works by adjusting the electrical resistance in a circuit. The resistance is adjusted by rotating the control knob or slider, which moves a contact point up and down a resistive element.RHL25R rotary potentiometer/rheostat has a quadrant resistance range of 25Kohms in the three standard positions - clockwise, counterclockwise and midrange. The current output is high at 15mA, which is suitable for a variety of applications. One of its most common applications is for volume and level control in audio equipment.The RHL25R is a four-terminal resistor. It has one terminal for the slider, one for the end-stop, one for the mounting bracket, and one for the wiper. The slider moves along the resistive element, and the wiper moves along the resistive element in the opposite direction. The slider and the wiper meet at the midpoint of the resistive element, which is the center of the resistor.The operation of the RHL25R rotary potentiometer/rheostat is simple. When the control knob is turned clockwise, the wiper moves up the resistive element. This increases the resistance, which reduces the current. The opposite happens when the knob is turned counterclockwise. This decreases the resistance and increases the current.In order to use the RHL25R rotary potentiometer/rheostat in an application, it is necessary to install the resistor on a circuit board. The endstop, slider, and wiper can be connected directly to the circuit board with wires or soldered terminals. The mounting bracket should be attached to the circuit board with mounting nuts.The RHL25R rotary potentiometer/rheostat is a very versatile component that can be used in a variety of applications. It is used in electronic devices like audio equipment, toys, and medical equipment. It can also be used to control the position of valves, motors, and actuators. With its wide range of applications, the RHL25R rotary pot is a very useful and necessary component for any circuit board.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description