RK102PJ224CS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RK102PJ224CS is a resistor network developed for the purpose of design. It belongs to the category of resistor networks, arrays, and contains 10 pins, five of which are used for input and output signals while the other 5 are optional. The RK102PJ224CS is suitable for a wide variety of applications, such as in computers, telecommunications, robotics, instrumentation, medical equipment, automotive, automotive, and general electronics.

The RK102PJ224CS consists of two identical components, each containing two sets of four resistors connected in series. The four resistors in each component are connected in parallel to each other and also to a common ground. The resistors have a resistance of 220Ω and a tolerance of ±0.1%. The pinout of the RK102PJ224CS is shown in Figure 1.

Figure 1: RK102PJ224CS Pinout

The primary application of RK102PJ224CS is a voltage divider. This resistor network is used to divide the input voltage in half, providing two output voltages that are half of the input. One of the outputs can then be used as an oscillator at frequencies up to 100MHz. The resistor network is also useful for impedance matching, noise reduction, and AC coupling.

In addition to the resistor network, the RK102PJ224CS also includes two additional components – a capacitor and a diode. The capacitor is connected between ground and the input terminal, and provides decoupling between the input and output. The diode is connected between the output and ground and provides reverse-voltage protection.

The RK102PJ224CS achieves its voltage-dividing function through its internal resistor network. The four internal resistors are connected in series and in parallel to form an equivalent resistance of 110Ω. By applying an input voltage between ground and +5V terminals, the resulting output voltage will be 5V divided by 2, resulting in an output voltage of 2.5V. The resistor network also functions to reduce noise and provide impedance matching, allowing signals to pass without distortion.

The resistor network is also useful for filtering. By using the diode, it can act as a low-pass filter or a high-pass filter. By connecting the capacitor between the input and output, it can also be used to block DC signals while passing AC signals. This is known as AC coupling.

The RK102PJ224CS is a versatile device for a variety of applications. Its primary use is as a voltage divider and an oscillator. It can also be used for impedance matching, noise reduction, filtering, and AC coupling. It is suitable for use in computers, telecommunications, robotics, instrumentation, medical equipment, automotive, and general electronics.

The specific data is subject to PDF, and the above content is for reference