Series:	Military, MIL-PRF-22684/01, RL07
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	220 kOhms
Tolerance:	±2%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are one of the most essential components in any electronic circuit. Through hole resistors are used in a variety of applications due to their reasonable cost, availability, wide range of wattage/resistance values and various types of tolerances. The specifics of through hole resistors vary depending on the application and manufacturer, however, some general principles remain consistent. This article will provide an overview of the RL07S224GRSL through hole resistor as well as provide information regarding its application field and working principles.The RL07S224GRSL through hole resistor is a type of axial lead component, meaning that the electrical connection is made at the two opposite ends of the resistor. This type of resistor is used in circuits operating at frequencies over 100kHz, as it has a very low inductance value partially due to the short lead lengths. This resistor is composed of a tiny chip of carbon film, metal film, or metal oxide encased in a glass-filled plastic tubular body. The value of the resistor is usually printed onto the body and can range anywhere from 1Ω to 1MΩ with ±2% - ±5% tolerance. The wattage of the resistor is determined by the resistor’s power rating and is usually offered up to 2 W.The RL07S224GRSL through hole resistors are commonly used in Arduino and Raspberry Pi projects, circuit applications, automotive and control systems, low power circuits, power supplies, high frequency circuits, and consumer electronics. The low inductance of the resistor makes it ideal for use in high frequency circuits. Furthermore, the resistor’s size and power makes it suitable for use in a wide variety of low power circuits such as those found in consumer electronics and Arduino/Raspberry Pi projects.The working principle of the RL07S224GRSL through hole resistor is simple. The resistor restricts the flow of electric current within a circuit without dissipating that current. This is accomplished by the resistor’s resistance to the flow of electrons due to its resistance material. This principle is also known as Ohm’s Law, which states that the current through a resistor is equal to the voltage across the resistor divided by the resistance of the resistor. Through careful selection of the resistor’s wattage and tolerance, the designer can adjust the circuit’s power levels and accuracy for the desired output.In conclusion, the RL07S224GRSL through hole resistor is an ideal choice for a wide variety of applications due to its reasonable cost, availability, low inductance, and ability to be used with a wide range of wattages and tolerances. The working principle of this through hole resistor is quite simple and follows the same principles of any other resistors in that it restricts the flow of electrons through the resistor by manipulating the material’s resistance. It is also important to note that this resistor should be used in high frequency circuits to ensure optimal performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description