RL20S271JRSL

The RL20S271JRSL (RL20) is a through-hole resistor designed for handling high current loads and providing the required resistance for a wide range of applications. It is a two layer resistor and has a very low resistance value as compared to other resistors. RL20 is suitable for circuits with high power and high voltage requirements.

The RL20 is usually used in power supplies, audio amplifiers, medical equipment, motor drives, motor control circuits and other high current applications. The RL20 has a wide operating temperature range and can withstand a maximum temperature of up to 200 degree Celsius. The RL20 is also capable of withstanding high shock and vibration levels and provides excellent stability in wide temperature range.

The RL20 is a two-layer resistor and is made up of a ceramic substrate and two thick metal layers. The substrate is made up of barium titanate or another energy storing material. This substrate is then covered with a layer of metal to provide extra protection. The metal layers are made from thicker material and have higher resistance as compared to other resistors. The two conductive layers are connected to the substrate via thin metal wires. The two metal layers can be either a positive or negative layer, depending on the application.

The RL20 works on the principle of Ohm’s Law, which states that the current that is passing through a resistor is proportional to the voltage drop across the resistor. In the case of the RL20, when a voltage is applied to the two metal layers, a resistance is created which decreases as the increase in current. This resistance can be further varied by adjusting the thickness of the metal layers.

The RL20 offers excellent current and temperature stability. It is also a good choice for applications which require low power dissipation. The RL20 is an ideal resistor for applications with high power and high voltage requirements. It is also used in power supplies, motor drives and medical equipments.

The RL20 can be used in a wide variety of applications. It is used as a switching element in circuits, to provide positive voltage levels and in frequency modulated circuits. It is also used in circuits for low voltage level detection, for AC and DC motor control and in sensing and monitoring applications. Its stable performance and low power consumption make it suitable for a wide range of applications.

The RL20 is an excellent resistor for high current applications as it provides the required resistance for such applications. The RL20 also provides excellent temperature and current stability and can withstand high shock and vibration levels. The high voltage and power requirements for which the RL20 is suitable makes it an ideal resistor for a variety of applications.