RLB1014-223KL

DC Resistance (DCR):	58 Ohm Max
Height - Seated (Max):	0.512" (13.00mm)
Size / Dimension:	0.343" Dia (8.70mm)
Supplier Device Package:	--
Package / Case:	Radial
Mounting Type:	Through Hole
Inductance Frequency - Test:	79.6kHz
Operating Temperature:	-40°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	220kHz
Q @ Freq:	45 @ 79.6kHz
Series:	RLB
Shielding:	Unshielded
Current - Saturation:	95mA
Current Rating:	92mA
Tolerance:	±10%
Inductance:	22mH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Inductors are electric components used for storing electrical energy in the form of a magnetic field. A fixed inductor is a type of inductor that has a fixed resistance. One example of a fixed inductor is RLB1014-223KL. This article will discuss the application field and working principle of the RLB1014-223KL.

Application Field

The RLB1014-223KL is a fixed inductor designed for a wide variety of applications. It is used in power supply products, DC/DC converters, and AC/DC converters. The inductor is suitable for communication equipment, personal computers, consumer electronics, and automotive applications. It is also suitable for low-noise circuits where minimal noise is desired.

Working Principle

The RLB1014-223KL is an inductor that works by creating a magnetic field. When the inductor is energized, a current is induced in the coil that creates a magnetic field around it. This magnetic field is stored in the form of magnetic energy. When a changing current passes through the inductor, a voltage is induced due to the magnetic flux that results. This voltage is used to power electronic devices or to control the current in a circuit.The inductance of the RLB1014-223KL is expressed in terms of henry. This is a unit of measurement used to quantify the amount of energy stored by an inductor. The RLB1014-223KL has an inductance of 223 Henries. This means that the inductor can store 223 Joules of energy per Amp of current. The nominal resistance of the inductor is rated at 0.25 Ohms.The RLB1014-223KL also has a temperature coefficient of ± 40ppm/°C. This value determines how the inductance of the inductor changes with temperature. The temperature coefficient indicates the amount of inductance change per degree Celsius of temperature change.

Conclusion

The RLB1014-223KL is a fixed inductor suitable for a variety of applications. Its inductance is rated at 223 Henries and its nominal resistance is rated at 0.25 Ohms. It also has an operating temperature coefficient of ± 40ppm/°C. This fixed inductor works by creating a magnetic field that is stored in the form of magnetic energy. When a changing current passes through the inductor, a voltage is induced due to the magnetic flux. This voltage is used to power electronic devices or to control the current in a circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description