Allicdata Part #: | RLS1K8E-ND |
Manufacturer Part#: |
RLS1K8E |
Price: | $ 105.39 |
Product Category: | Potentiometers, Variable Resistors |
Manufacturer: | Ohmite |
Short Description: | POT 1.8K OHM 150W WIREWOUND LIN |
More Detail: | 1.8k Ohm 1 Gang Linear Panel Mount Potentiometer N... |
DataSheet: | RLS1K8E Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
5 +: | $ 95.81040 |
Temperature Coefficient: | -- |
Mounting Type: | Panel Mount |
Bushing Thread: | 3/8-32 |
Actuator Diameter: | 0.250" (6.35mm) |
Actuator Length: | 0.875" (22.23mm) |
Actuator Type: | Flatted |
Termination Style: | Solder Lug |
Resistive Material: | Wirewound |
Adjustment Type: | User Defined |
Rotation: | 300° |
Number of Turns: | 1 |
Series: | L |
Power (Watts): | 150W |
Built in Switch: | None |
Number of Gangs: | 1 |
Tolerance: | ±10% |
Resistance (Ohms): | 1.8k |
Taper: | Linear |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Rotary Potentiometers and Rheostats are common devices for measuring electrical resistance by sensing the potential difference between two ends of a resistance track when a rotating arm is attached to a shaft and moved along its length. RLS1K8E is a potentiometer and rheostat product from Resistor Solutions designed for a variety of applications. This article will discuss the application fields and working principle of this RLS1K8E.
RLS1K8E is mainly used for measuring or adjusting the resistance of devices or circuits. It is suitable for applications requiring an adjustable resistance with a linear tracking of response. This type finds applications in many types of design, including test measurement, automotive, and audio conditioning.
RLS1K8E is based on using a fine resistance track which is created by sputtering a thin film of metal alloy onto an insulating substrate. The track is then coated with a passivation layer to provide protection against wear and oxidation. The Variable resistor can then be constructed by mounting a tab-style terminal onto the track and attaching a rotating arm. RLS1K8E has a resistance range of 0.1kΩ to 10kΩ and features an ‘end-stop’ design to limit the rotation of the arm within its prescribed range. As well as being capable of both low noise and low drift over its lifetime.
The working principle of RLS1K8E is that when the rotating arm is turned it will move along the length of the resistance track and vary the resistance between the terminals. This means that the resistance between the terminals will change in proportion to the angle of the arm. The response of the RLS1K8E is quite linear which means the resistance between the terminals will remain correlated with the angle of the arm over the entire range.
The RLS1K8E is also capable of operating in either a ‘negative’ or a ‘positive’ resistance mode, making it a very versatile device. In negative resistance mode the resistance will increase when the arm is turned clockwise and decrease when turned counter-clockwise. In positive mode the resistance will be the reverse, increasing when the arm is turned counter-clockwise and decreasing when turned clockwise. The direction of resistance travel can also be switched from negative to positive just by flipping the polarity of the two terminals.
The RLS1K8E is a versatile device that is suitable for a variety of applications. Its linear tracking, low noise and low drift operation mean it is well suited for applications such as test measurement, automotive, and audio conditioning. Through its ability to operate in both positive and negative modes, the RLS1K8E is able to meet the requirements of a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RLS100E | Ohmite | 98.08 $ | 1000 | POT 100 OHM 150W WIREWOUN... |
RLS10RE | Ohmite | 98.08 $ | 1000 | POT 10 OHM 150W WIREWOUND... |
RLS150E | Ohmite | 98.08 $ | 1000 | POT 150 OHM 150W WIREWOUN... |
RLS15RE | Ohmite | 98.08 $ | 1000 | POT 15 OHM 150W WIREWOUND... |
RLS1K25E | Ohmite | 105.39 $ | 1000 | POT 1.25K OHM 150W WIREWO... |
RLS1K8E | Ohmite | 105.39 $ | 1000 | POT 1.8K OHM 150W WIREWOU... |
RLS100 | Ohmite | 106.92 $ | 1000 | POT 100 OHM 150W WIREWOUN... |
RLS150 | Ohmite | 106.92 $ | 1000 | POT 150 OHM 150W WIREWOUN... |
RLS15R | Ohmite | 106.92 $ | 1000 | POT 15 OHM 150W WIREWOUND... |
RLS1K25 | Ohmite | 114.91 $ | 1000 | POT 1.25K OHM 150W WIREWO... |
RLS1K8 | Ohmite | 114.91 $ | 1000 | POT 1.8K OHM 150W WIREWOU... |
RLS1R0E | Ohmite | 118.71 $ | 1000 | POT 1 OHM 150W WIREWOUND ... |
RLS10KE | Ohmite | 121.72 $ | 1000 | POT 10K OHM 150W WIREWOUN... |
RLS10K | Ohmite | 132.66 $ | 1000 | POT 10K OHM 150W WIREWOUN... |
RLS10R | Ohmite | 0.0 $ | 1000 | POT 10 OHM 150W WIREWOUND... |
RLS1R0 | Ohmite | 0.0 $ | 1000 | POT 1 OHM 150W WIREWOUND ... |
RLS139TE-11 | ROHM Semicon... | 0.0 $ | 1000 | DIODE GEN PURP 80V 130MA ... |
POT 10 OHM 500W WIREWOUND LINEAR10 Ohm 1...
POT 15 OHM 100W WIREWOUND LINEAR15 Ohm 1...
POT 5K OHM 1W LINEAR5k Ohm 1 Gang Linear...
POT 50K OHM 2W CERMET LINEAR50k Ohm 1 Ga...
POT 10K OHM 1/2W PLASTIC LINEAR10k Ohm 1...
POT 2K OHM 2W WIREWOUND LINEAR2k Ohm 1 G...