RM 10AV1 Discrete Semiconductor Products

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io):	1.2A
Voltage - Forward (Vf) (Max) @ If:	910mV @ 1.5A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	10µA @ 600V
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	Axial
Supplier Device Package:	Axial
Operating Temperature - Junction:	-40°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionThe RM 10AV1 is a single diode rectifier. It is a device used in an electrical circuit to convert alternating current (AC) of alternating polarity into direct current (DC) of one polarity. It is commonly used in power supplies, where AC current is converted into DC current to be supplied to the connected electrical components. In this article, we will look at the application field and working principle of the RM 10AV1.Application FieldThe RM 10AV1 is used in both low and medium power applications. Its maximum reverse voltage is 1000V, which makes it suitable for applications where a high amount of power must be handled. It can be used in electronic rectifiers, line converters, radio transmitters, dc-dc converters, flyback converters, power supply filters, and electrolytic caps.Working PrincipleThe working principle of RM 10AV1 is based on the PN junction diode, which is the basic component of modern semiconductor electronics. The PN junction is formed by combining N-type and P-type semiconductor materials. When forward biased, the PN junction creates a low resistance path for current flow. The reverse bias creates a high resistance state, limiting the amount of current that can pass through the diode.The RM 10AV1 is a single diode, which is connected to a circuit in the same way that a conventional diode is connected. When a voltage is applied to the diode, it lowers the resistance of the circuit path and allows current to flow. The controlling of the current flow is achieved by the level of reverse bias. When the reverse bias is increased, the current will be reduced.In the RM 10AV1, the PN junction is connected to two terminals. The forward bias terminal is connected to the positive side of the circuit, while the reverse bias terminal is connected to the negative side. The forward bias terminal is the anode, while the reverse bias terminal is the cathode.The RM 10AV1 is designed to allow current flow in only one direction, from the anode to the cathode. When the forward voltage applied to the diode is greater than the reverse voltage, the diode will create a low resistance path and allow current to pass through. When the reverse voltage exceeds the forward voltage, the resistance of the circuit increases and no current will flow.ConclusionThe RM 10AV1 is a single diode rectifier which is commonly used in power supplies. It is a device that converts AC of alternating polarity into DC of one polarity. It has a maximum reverse voltage of 1000V and is used in both low and medium power applications. The working principle of the RM 10AV1 is based on the PN junction diode, which is connected to two terminals. The forward bias terminal is the anode, while the reverse bias is the cathode. The RM 10AV1 is designed to only allow current flow in one direction, from the anode to the cathode. By controlling the level of reverse bias, the current can be regulated.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description