RM062PJ131CS

Resistor Networks, Arrays as a passive electronic component, play a key role in the world of circuit design. The RM062PJ131CS, a surface mount resistor array developed by Panasonic, is one of the most widely used resistors in a variety of precision applications. This article will discuss its application fields and working principle.

Application fields

The RM062PJ131CS is a chip array composed of 12 resistors with 5 x 2 form factors. It is especially suited for components of precision circuits, where uniformity and accuracy of the circuit components are of paramount importance. Its Applications include the following general circuit control and related applications:

• Precision analog signals with small changes
• Filtering out high and low frequency noise
• Current division
• Precision voltage division
• One-shot waveform generator

Owing to its small size and wide application scope, the RM062PJ131CS is widely used in consumer electronics, computing, telecommunications and other areas. For example, it is often used in telephone networks to connect the central switching system to the local loop, or in the antenna switch and manifold of base stations.

Working Principle

The RM062PJ131CS is an array of 12 resistors in a 5 x 2 form factor. Its resistors are arranged in 2 different configurations, namely parallel and series. Each resistor has an assigned value of 6.14 kilo-Ohms. The combined resistance of the array is determined by the configuration of the resistors: a parallel configuration used for lower resistance values, and a series configuration used for higher resistance values.

The RM062PJ131CS allows precision circuit designers to construct complex resistive networks with no additional components. The array is capable of developing a wide range of resistive values. At 0.1Ω, the maximum resistance value is 112 kilo-Ohms, while the minimum resistance value is 0.25Ω. Different values can be created by selecting different combinations of resistors from the array.

Conclusion

RM062PJ131CS is a surface mount resistor array developed by Panasonic. It is composed of 12 resistors arranged in a 5 x 2 array, and is especially suitable for precision components of circuit boards. Its applications include precision analog signals, current/voltage division, filtering, and waveshaping; these applications are used in many areas, such as consumer electronics, computing, and telecommunications. Since the RM062PJ131CS can provide a wide range of resistive values, it is a highly precise and versatile component.