RM062PJ680CS

Power Per Element:	31.25mW
Height - Seated (Max):	0.013" (0.33mm)
Size / Dimension:	0.032" L x 0.024" W (0.80mm x 0.60mm)
Supplier Device Package:	0603
Package / Case:	0302 (0805 Metric), Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±200ppm/°C
Series:	RM
Number of Pins:	4
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	2
Tolerance:	±5%
Resistance (Ohms):	68
Circuit Type:	Isolated
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are one of the widely used electronic components for electrical and electronic designs. The RM062PJ680CS is a stackable resistor network array developed by Murata Manufacturing company. It is a two-terminal resistor network which consists of two separate series resistors embedded in one package. It contains an inner network of two series resistors, and each resistor can be connected in either parallel or series configuration. The resistor array can have a maximum of eight possible resistances. The RM062PJ680CS is a surface mount device with a footprint of 0.062 x 0.08 inches. It has two 6-pin terminals on a 0.2 millimeter pitch. It is constructed using thick film technology and consists of a conductive glass substrate and a high temperature-resistant epoxy. It has a rated power of 0.1W and an operating temperature range from 0 to 85°C.The RM062PJ680CS resistor array has a high insulation voltage rating of 250Vrms. This component has a high-temperature stability and is suitable for high-temperature applications. It is also designed to minimize inductance and has an extremely low resistance tolerance for precise and reliable operation. It is RoHS compliant and compatible with IR and wave solder. The RM062PJ680CS can be used in many applications where two-terminal resistor networks are required. These include chip capacitors, multiple voltage regulator circuits, audio and sound circuits, power supply circuits, and variable capacitance circuits. This component is also used to provide a precise bias or offset voltage in electronic circuits. In addition, it is ideal for designing low-power amplifiers, current mirrors, and divider circuits. The working principle of the RM062PJ680CS is based on its unique resistor network configuration. It contains two individual resistors connected in series. Each resistor is connected through one of the two terminals, and all the resistors in the array are connected together. The combination of two or more resistors forms the circuit in which the current flows through each terminal in the resistor network. This current will be determined by the combined resistance of the resistors, hence creating a voltage drop across each resistor. The output voltage or resistance value can be adjusted by connecting one series resistor in parallel with another, or by connecting two resistors in series, depending on the application. The use of resistor arrays such as the RM062PJ680CS is an efficient way to provide fixed resistance values for various applications. It is also relatively easy to use and provides an accurate and precise resistance value. The resistor array can be used in combination with other components to adjust output voltage or current levels as required. This helps to reduce the number of components used, and makes it easier to design complex electronic circuits. As a result, the RM062PJ680CS is a versatile and cost-effective solution for many electrical and electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description