RN55C1100FBSL

Series:	Military, MIL-R-10509/7, RN55
Packaging:	Bulk
Part Status:	Active
Resistance:	110 Ohms
Tolerance:	±1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors : RN55C1100FBSL

Through hole resistors are small electronic components, and are among the most ubiquitous components within the engineering field. Resistors are used for a variety of purposes, ranging from signal attenuation to noise suppression, and can vary in value, form factors, wattage and power ratings. RN55C1100FBSL resistors, in particular, are commonly used in power control and voltage division problems.The RN55C1100FBSL is a type of through hole resistor, with a cylindrical shape with screw terminals on the top and bottom. This size is extremely common and is available in a wide variety of values to meet the particular needs of the engineer. RN55C1100FBSL resistors are constructed with a ceramic core, which is then wrapped in either a metallic, organic, or glass insulation. The number of winding wraps is determined by the resistor’s target value and tolerance. Like its other counterparts, the RN55C1100FBSL is capable of dissipating power, and this is an important consideration when selecting this resistor size. Its power rating is 2W and its tolerance is typically specified at 2%. The highest voltage which it can handle is limited by its insulation, and this is rated at 250V. High voltages should be avoided if possible, since this can quickly wear down the insulation material. These resistors are used in a wide array of applications, and are most commonly found in the power control arena. They can be used for voltage division, current limiting, surge protection, and noise suppression. They are also used in a variety of other applications, including audio crossover networks, radio-frequency amplifiers, and automotive applications.  The RN55C1100FBSL is capable of dissipating up to 2W of power, so it is able to handle a higher wattage than its smaller cousins. It can usually be found in power management or voltage regulation applications, and it is often used in automotive applications where an increase in voltage can result in a dangerous situation. It is also often used in high-power audio amplifiers, allowing it to withstand loud levels of sound pressure, without becoming damaged.In terms of its working principle, the RN55C1100FBSL follows the same principles of any other hotast resistor. It has two contacts, which are connected to two terminals, and it resists the flow of electrical current. The amount of resistance provided is determined by the number of turns on the winding, as well as the material used for the resistor. The resistance value is usually imprinted on its body, and this is used to calculate the exact amount of resistive value that has been provided.In conclusion, the RN55C1100FBSL is a type of through hole resistor that is most commonly used in power control and voltage regulation applications. It is constructed with a ceramic core and a metallic, organic, or glass insulation, and has a power rating of 2W and tolerance of 2%. Its applications range from power management and current limiting, to noise suppression and audio crossover networks. It follows the same principles of any other resistor and provides resistance by having a certain number of winding turns of a conductor around a core.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description