Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors that mount with leads through holes in PCBs, often referred to as through-hole resistors or TH resistors, are the most common mounted resistors in electronic designs today.Most electronic resistors today, including the RN55C5492BRE6, are made from carbon, as carbon has a high resistance to the flow of electricity, and can be made into very small sizes. The RN55C5492BRE6 is a through-hole resistor with a resistance value of 0.5MΩ.

Application Field Of RN55C5492BRE6

The RN55C5492BRE6 is a through-hole resistor with a resistance value of 0.5MΩ, making it a suitable choice for current-limiting, signal-attenuation, or voltage-pulling applications. It is most often found in high-end analog circuitry for applications such as signal processing, digital-to-analogue conversion, and cyclic modulation. It is also used for voltage and current limiting in power supplies, and for Ethernet line termination.

Working Principle Of RN55C5492BRE6

As with any through-hole resistor, the RN55C5492BRE6 works by creating an electrical resistance to the passage of electric current. As current passes through the resistor, some of the energy is dissipated as heat, and some is dissipated as voltage, depending on the voltage level of the current being applied. The heat produced during this process is generally low, so the resistor does not affect surrounding components. The voltage and current limiting capabilities of the RN55C5492BRE6 make it a suitable choice for applications where precise voltages and currents must be maintained.

The RN55C5492BRE6 is a through-hole resistor with a resistance value of 0.5MΩ, so it is important to consider the signal strength when selecting a resistor of this value. If a current is too high, the RN55C5492BRE6 will dissipate too much energy and the resistors may overheat, or even catch fire. It is also important to consider how the environmental conditions may affect the resistor, as temperature, humidity, and vibration can all affect the effectiveness of the resistor.

Conclusion

The RN55C5492BRE6 is a through-hole resistor with a resistance value of 0.5MΩ. It is a suitable choice for applications where current-limiting, signal-attenuation, or voltage-pulling is required. As with other through-hole resistors, it works by creating an electrical resistance to the passage of electric current, dissipating some of the energy as heat and some as voltage. It is important to consider the strength of the signal when selecting the RN55C5492BRE6 as it can become damaged if a current is too high.

The specific data is subject to PDF, and the above content is for reference