RN55C1782BRE6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are resistors that are mounted through the holes in a printed circuit board (PCB) and soldered to the conductive tracks on the body. They are available in many different shapes and sizes, and in most cases, the physical size of the resistor is directly related to the power rating, and larger resistors are used to handle higher power applications. The RN55C1782BRE6 through-hole resistor is manufactured by Panasonic and is a low power resistor with a power rating of up to 0.125W. This surface mount resistor also has a 2-pin terminal and is typically used in applications such as lighting, amplification, and signal conditioning.

The RN55C1782BRE6 through-hole resistor has many features to help it meet the requirements of these applications. The resistor is constructed with a high resistance ceramic body, and the terminals are plated with silver to provide the necessary electrical connections. The resistors are also available in a variety of resistance values, ranging from 100 ohms up to 1K ohms, which can be used in many different applications. Additionally, the RN55C1782BRE6 offers a wide range of operating temperature ranges, from -55˚C up to +25˚C.

The working principle of the RN55C1782BRE6 through-hole resistor is based on the principle of resistance, which states that a resistor will create a voltage drop across its leads when a current passes through it. The voltage drop is affected by two factors: the amount of resistance presented by the resistor, and the amount of current that passes through it. The current flowing through the resistor will create an electromotive force proportional to the resistance of the resistor. The voltage drop is then equal to the electromotive force divided by the total amount of current passing through the resistor.

To ensure proper operation of the RN55C1782BRE6 through-hole resistor, it is important to install the resistor correctly. First, it is important to make sure that the terminals are firmly seated in the PCB holes. If the terminals are not firmly seated, the resistor may not be able to transfer power efficiently and may cause damage to the PCB traces or the resistor itself. Additionally, it is important to ensure that the resistor is properly soldered to the PCB to ensure that the electrical connections are secure and that the resistor is properly insulated from any other components on the board.

The RN55C1782BRE6 through-hole resistor is a great choice for many applications where a low power device is required. It is a reliable resistor with a high resistance value and a wide operating temperature range. Additionally, the RN55C1782BRE6 can be easily installed on a PCB and is a cost-effective solution for many applications.

The specific data is subject to PDF, and the above content is for reference