RN55C9530FRSL

Series:	Military, MIL-R-10509/7, RN55
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	953 Ohms
Tolerance:	±1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are resistors with leads that are inserted into the holes on a printed circuit board. They are available in variety of shapes and sizes and they are used in a wide range of applications.The RN55C9530FRSL is a through hole resistor developed by ROHM. It is a high power low resistance resistor and has a rated power of 5W, an operating temperature range of -55°C to +105°C, and a rated resistance of 3R0 (± 5%). It is suitable for use in a wide range of applications such as home appliances, household electrical products and automotive electronics.

Working Principle

Through hole resistors are made up of a metal film that is deposited on a carrier substrate. The metal film is then etched with a pattern of stripes or dots in order to create a resistance path. The metal film acts as a conductor and carries a current through its resistivity and voltage potential. The resistance value of the through hole resistor is determined by the width of the metal, the resistivity of the material and the length of the resistor. The resistance value of the resistor will increase with the width of the metal and decrease with the length of the resistor. When a current is passed through the resistor, it creates a voltage drop across the resistor proportional to the amount of current. This voltage drop is then used to control the flow of current.

Applications

The RN55C9530FRSL is suitable for a wide range of applications including power supply circuits, voltage protection circuits, switching circuits, signal coupling circuits, low noise circuits and high current circuits. In power supply circuits, the resistor is used to limit the current flow in order to protect the power supply from overloads. It can also be used to provide steady power over a range of input voltages. In voltage protection circuits, the resistor is used to protect sensitive components and circuits from spikes and high voltages. It can also be used to limit the amount of current that flows between two points. In switching circuits, the resistor is used to control the switching times of digital circuits. It can also be used to reduce noise and limit the amount of current flowing through the circuit. In signal coupling circuits, the resistor is used to enhance the transfer of signals from one stage to another. It can also be used to filter noise and prevent interference. In low noise circuits, the resistor is used to reduce the amount of noise in a circuit. It can also be used to improve the signal to noise ratio and reduce the distortion of signals. In high current circuits, the resistor is used to limit the amount of current that is passing through the circuit. It can also be used to reduce the power loss and increase the efficiency of the circuit.

Conclusion

The RN55C9530FRSL is a through hole resistor developed by ROHM. It is suitable for a wide range of applications including power supply circuits, voltage protection circuits, switching circuits, signal coupling circuits, low noise circuits and high current circuits. It has a rated power of 5W, an operating temperature range of -55°C to +105°C, and a rated resistance of 3R0 (± 5%). The resistance value of the resistor is determined by the width of the metal, the resistivity of the material and the length of the resistor. When a current is passed through the resistor, it creates a voltage drop across the resistor proportional to the amount of current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description