RN55D3202FRE6

Series:	Military, MIL-R-10509/7, RN55
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	32 kOhms
Tolerance:	±1%
Power (Watts):	0.125W, 1/8W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors (also known as THRs) are electronic components that are used to add resistance to a circuit by limiting the flow of electricity. They are commonly used in electronics, such as in amplifiers and power supplies, as well as in other areas such as automotive, medical, and consumer electronics. Through hole resistors are relatively small components, typically 1/8 inch or smaller in diameter, with two leads that must be connected to the circuit for the resistor to properly function.

Types of Through Hole Resistors

Through hole resistors come in a variety of types and ratings, each suited to a specific range of applications. These include carbon film, metal oxide, and wire-wound resistors. Additionally, resistors can be further categorized into axial lead, radial lead, or round lead resistors. Axial-lead resistors commonly use a cylindrical-body form, and have two leads—one each at each end of the resistor body. Radial-lead resistors typically come in a round-bodied form and have two or three leads, with the third being on the side of the resistor body. They are used primarily in high-temperature and high-power applications. Finally, round-lead resistors are typically found on printed circuit boards, and feature a round body with two leads on the same side.

RN55D3202FRE6 Application Field and Working Principle

The RN55D3202FRE6 is a carbon film resistor with axial leaded design. It has 2 watt rated power, resistor tolerance of ± 5%, operating temperature range of -55 °C to +125 °C, and a maximum working voltage of 200V. These resistors are ideal for use in a number of applications including:

• Amplifiers
• Power supplies
• Inverters
• Heating systems
• Lighting systems
• Industrial and automotive systems

The working principle of a through hole resistor is relatively straightforward. When a current passes through the resistor, some of the electrical energy is converted to heat energy according to Ohm\'s law. This heat energy is then dissipated into the surrounding environment by the resistor’s body. The amount of energy that is converted is dependent on the resistor’s value, or resistance. The higher the resistance value, the more heat energy is converted.

Conclusion

Through hole resistors are small yet reliable components that enable a variety of applications to function properly. The RN55D3202FRE6 is a specifc type of THRs that can be found in a variety of electronics and industrial applications. This resistor is constructed with a carbon film body design, and has a relatively high operating temperature and power rating. The working principle for this type of resistor is relatively simple, as the electrical energy passing through is converted into heat energy which is then released into the surrounding environment. With that, the RN55D3202FRE6 is a versatile and effective type of through hole resistors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description